Linux Laptop-HOWTO Werner Heuser v1.3, 8 March 1999 Laptops are different from desktops/towers. They use certain hardware such as PCMCIA cards, infrared ports, batteries, docking stations. Often their hardware is more limited (e.g. disk space, CPU speed), though the performance gap is becoming smaller. In many instances, laptops can become a desktop replacement. Hardware support for Linux on laptops is sometimes more limited (e.g. graphic chips, internal modems). Laptops often use specialized hardware, hence finding a driver can be more difficult. Laptops are often used in changing environments, so there is a need for multiple configurations and addi­ tional security strategies. Though there are laptop related HOWTOs available already, this HOWTO contains a concise survey of laptop related documents. Also, laptop related Linux features, such as installation methods for laptops (via PCMCIA, without CD drive, etc.), laptop hardware features and configurations for different (network) environments are described. ______________________________________________________________________ Table des matières 1. Preface 2. Copyright, Disclaimer and Trademarks 3. Which Laptop to Buy? 3.1 Introduction 3.2 Portables, Laptops/Notebooks, Sub/Mini-Notebooks, Palmtops, PDAs/HPCs 3.2.1 Portables 3.2.2 Laptops/Notebooks 3.2.3 Sub-Notebooks/Mini-Notebooks 3.2.4 Palmtops 3.2.5 Personal Digital Assistants (PDAs)/Handheld PCs (HPCs) 3.2.6 Cellular Phones, Calculators, Digital Cameras, Wearable Computing 3.3 Linux Features 3.4 Main Hardware Features 3.4.1 Weight 3.4.2 Display 3.4.3 Batteries 3.4.4 CPU 3.4.4.1 Supported CPU Families 3.4.4.2 Miscellaneous 3.4.5 Keyboard Quality 3.4.6 Price 3.4.7 Power Supply 3.5 Sources of More Information 3.6 Linux Compatibility Check 3.6.1 Related HOWTOs 3.6.2 Check Methods in General 3.7 Buying a Second Hand Laptop 3.8 No Hardware Recommendations 3.9 Laptop Distribution 3.9.1 Requirements 3.9.2 Recommendation 4. Installation Methods 4.1 Related HOWTOs 4.2 Introduction 4.3 From a Boot Floppy plus CD-ROM - The Usual Way 4.4 From a DOS or Windows Partition at the same Machine 4.5 From a Second Machine With a Micro Linux On a Floppy 4.5.1 Introduction 4.5.2 Prerequisites 4.5.3 Source Machine 4.5.4 Destination Machine 4.5.5 Configuration of the Source Machine after the Transfer 4.5.6 Miscellaneous 4.6 From a Second Machine With a 2.5" Hard Disk Adapter 4.7 From a PCMCIA Device 4.8 From a Parallel Port Device (ZIP Drive, CD Drive) 5. Hardware In Detail 5.1 PCMCIA Controller 5.1.1 Linux Compatibility Check 5.1.2 Related HOWTOs 5.1.3 PCMCIA Configuration - Survey 5.1.3.1 Software 5.1.3.2 PCMCIA Controller 5.1.3.3 PCMCIA Card 5.2 Infrared Port 5.2.1 Linux Compatibility Check 5.2.1.1 SIR 5.2.1.2 FIR 5.2.1.3 Hardware Survey 5.2.2 Related HOWTOs 5.2.3 IrDA Configuration - Survey 5.2.3.1 IrDA 5.2.3.1.1 Kernel 5.2.3.1.2 Software 5.2.3.1.3 Hardware 5.2.3.2 Linux Remote Control - LiRC 5.3 Graphic Chip 5.3.1 Linux Compatibility Check 5.3.1.1 Video Mode 5.3.1.2 Text Mode 5.3.2 Related HOWTOs 5.3.3 Survey X-Servers 5.3.4 Resources 5.3.5 External Monitor 5.3.6 Miscellaneous 5.4 Sound 5.4.1 Linux Compatibility Check 5.4.2 Related HOWTOs 5.4.3 Survey Sound Drivers 5.5 Keyboard 5.5.1 Linux Compatibility Check 5.5.2 Second Keyboard 5.6 Mice and their Relatives 5.6.1 Linux Compatibility Check 5.6.2 Related HOWTOs 5.6.3 Mice Species 5.6.4 Resources 5.6.5 External Mouse 5.7 Advanced Power Managment (APM) 5.7.1 Linux Compatibility Check 5.7.2 Introduction 5.7.3 Caveats 5.7.4 Troubleshooting 5.8 Batteries 5.9 USB 5.10 Memory 5.11 Plug-and-Play Devices (PnP) 5.12 Docking Station / Port Replicator 5.12.1 Definitions 5.12.2 Other Solutions 5.12.3 Connection Methods 5.13 Network Connections 5.13.1 Related HOWTOs 5.13.2 Connection Methods 5.13.2.1 PCMCIA Network Card 5.13.2.2 Serial Null Modem Cable 5.13.2.3 Parallel Port NIC (Pocket Adaptor) 5.13.2.4 Parallel "Null" Modem Cable 5.13.2.5 Docking Station NIC 5.14 Modem 5.15 SCSI 5.15.1 Hardware Compatibility Check 5.15.2 Related HOWTOs 5.15.3 Survey 5.16 Floppy Drive 5.16.1 Linux Compatibility Check 5.17 CD Drive 5.18 Harddisk 5.18.1 Linux Compatibility Check 5.18.2 Miscellaneaous 5.19 ZV Port 5.20 Accessories 5.20.1 PCMCIA Cards 5.20.1.1 Card Families 5.20.1.2 Linux Compatibility Check 5.20.2 Printers 5.20.3 Power and Phone Plugs, Power Supply 5.20.4 Bags and Suitcases 6. Different Environments - On the Road 6.1 Related HOWTOs 6.2 Configuration Tools 6.2.1 NetEnv 6.2.2 Mobile IP 6.2.2.1 Resources 6.2.3 DHCP/BootP 6.2.4 PPPD Options 6.2.5 (TT 6.2.6 PCMCIA - Schemes 6.2.7 Bootloaders 6.2.7.1 LILO 6.2.7.2 Other Bootloaders 6.2.8 X-Windows 6.2.9 More Info 6.3 Data Transport Between Different Machines 6.3.1 Hardware 6.3.2 Software 6.3.2.1 Source Code Control System (SCCS) 6.3.2.2 CODA Filesystem 6.3.2.3 WWWsync 6.4 Security in Different Environments 6.4.1 Introduction 6.4.2 Means of Security 6.5 Dealing with Down Times (Cron Jobs) 7. Other Resources 8. Repairing the Hardware 9. Solutions with Laptops 9.1 Introduction 9.2 Mobile Network Analyzer 9.3 Mobile Router 9.4 Hacking and Cracking Networks 9.5 Lectures 9.6 Mobile Data Collecting 9.6.1 Related HOWTOs 9.6.2 Applications 9.7 Mobile Office 9.8 Connection to Digital Camera 9.9 Connection to QuickCam (Video) 9.10 Connection to Television Set 9.11 Connection to Cellular Phone 9.12 Connection to Global Positioning System (GPS) 9.13 Connection via Amateur Radio (HAM) 9.14 Satellite Watching 10. Other Operating Systems 10.1 DOS/Windows9x/NT 10.1.1 Introduction 10.1.2 DOS Tools to Repartition a Hard Disk 10.1.3 Caveats 10.1.4 Multi Boot 10.1.5 Partition Sharing 10.2 BSD Unix 11. ToDo 12. Revision History 13. Credits 14. Appendix A - Survey about Micro Linuxes 15. Appendix B - Dealing with Limited Resources or Tuning the System 15.1 Related HOWTOs 15.2 Introduction 15.3 Small Space 15.3.1 Introduction 15.3.2 Techniques 15.4 Harddisk Speed 15.5 Small Memory 15.5.1 Related HOWTOs 15.5.2 Techniques 15.6 Low CPU Speed 15.7 Power Saving Techniques 15.8 Kernel 15.8.1 Related HOWTOs 15.9 Tiny Applications and Distributions ______________________________________________________________________ 11.. PPrreeffaaccee Life is the first gift, love is the second, and understanding is the third. -- Marge Piercy People like either laptops or desktops. I like to work with laptops rather than with desktops. I like Linux too. My first HOWTO is the Linux/IR-HOWTO about infrared support for Linux. Also I have written some pages about Linux with certain laptops: Olivetti Echos 133 DM (together with Kurt Saetzler), HP OmniBook 800CT, HP OmniBook 3100 (together with Friedhelm Kueck) and COMPAQ Armada 1592 DT. But I don't claim to be a laptop guru, I just had the opportunity to install Linux on some laptops and I simply want to share the information I collected. This document isn't ready yet. If you like to write a chapter or even a smaller part by yourself, please feel free to contact me. Also your suggestions and recommendations are welcome. But please don't expect me to solve your laptop related problems. Please read all according manual pages, HOWTOs and WWW sites first, than contact the other resources mentioned below. Many times I have mentioned _M_e_t_a_L_a_b formerly known as _S_u_n_S_i_t_e. This site carries a heavy load, so do yourself a favor, use one of its mirrors http://metalab.unc.edu/pub/Linux/MIRRORS.html . For _D_e_b_i_a_n_/_G_N_U _L_i_n_u_x the mirror URLs are organized in this scheme http://www..debian.org . Since I don't own a non-Intel based machine, this HOWTO might not contain all the details for non-Intel systems or may contain inaccuracies. Sorry. This text is included in the LINUX DOCUMENTATION PROJECT http://metalab.unc.edu/LDP . The latest version of this document is available in HTML format at http://www.snafu.de/~wehe/index_li.html . Richard Worwood mirrors this HOWTO at http://www.felch01.demon.co.uk/Links/links.html . A similar HOWTO written in french by Lionel "Trollhunter" you may find at http://www.ie2.u-psud.fr/~bouchpan . Werner Heuser 22.. CCooppyyrriigghhtt,, DDiissccllaaiimmeerr aanndd TTrraaddeemmaarrkkss Copyright © 1999 by Werner Heuser. This document may be distributed under the terms set forth in the LDP license at http://metalab.unc.edu/LDP/COPYRIGHT.html . This is free documentation. It is distributed in the hope that it will be useful, but without any warranty. The information in this document is correct to the best of my knowledge, but there's a always a chance I've made some mistakes, so don't follow everything too blindly, especially if it seems wrong. Nothing here should have a detrimental effect on your computer, but just in case I take no responsibility for any damages incurred from the use of the information contained herein. Some laptop manufacturers don't like to see a broken laptop with an operating system other than the one shipped with it, and may reload MS-Windows if you complain of a hardware problem. They may even declare the warranty void. Though IMHO this isn't legal or at least not fair. Always have a backup of both the original configuration and your Linux installation if you have to get your laptop repaired. Though I hope trademarks will be superfluous sometimes (you may see what I mean at Open Source Definition http://www.opensource.org/osd.html) : If certain words are trademarks, the context should make it clear to whom they belong. For example "MS Windows NT" implies that "Windows NT" belongs to Microsoft (MS). Mac is by Apple Computer. Trademarks belong to their respective owners. 33.. WWhhiicchh LLaappttoopp ttoo BBuuyy?? 33..11.. IInnttrroodduuccttiioonn Portable computers may be divided into different categories. This is a subjective decision, but I try to do so. My groupings roughly follow the generally accepted marketing categories. The criteria could be: 1. Weight: Often expressed in terms like Portables, Laptops/Notebooks, Sub/Mini-Notebooks, Palmtops/PDAs. There is no standard method to define the weight of a laptop, therefore the data provided by the manufacturers (and which are given below) have to be considered as approximations. The question is how the power supply (wether external or internal) or swappable parts like CD and floppy drive, are included in the weight. 2. Supported Operations Systems: proprietary versus open 3. Price: NoName versus Brand 4. Hardware Features: display size, harddisk size, CPU speed, battery type, etc. 5. Linux Support: graphic chip, sound card, infrared controller (IrDA), internal modem, etc. 33..22.. PPoorrttaabblleess,, LLaappttooppss//NNootteebbooookkss,, SSuubb//MMiinnii--NNootteebbooookkss,, PPaallmmttooppss,, PPDDAAss//HHPPCCss 33..22..11.. PPoorrttaabblleess Weight greater than 4.0 kg (9 lbs). Features like a PC, but in a smaller box and with LCD display. Examples: lunchbox or ruggedized laptops (e.g., http://www.bsicomputer.com/) 33..22..22.. LLaappttooppss//NNootteebbooookkss Weight between 1.7 and 4.0 kg (4 to 9 lbs). Features custom hardware and usually a special CPU. Examples: HP OmniBook 3100, COMPAQ Armada 1592DT. The terms _l_a_p_t_o_p and _n_o_t_e_b_o_o_k seem equivalent to me. 33..22..33.. SSuubb--NNootteebbooookkss//MMiinnii--NNootteebbooookkss Weight between 1.3 and 1.7 kg (3 to 4 lbs). Features: external floppy drive, external CD drive. Examples: HP OmniBook 800CT, Toshiba Libretto 100, COMPAQ Aero, SONY VAIO 505. 33..22..44.. PPaallmmttooppss Weight between 0.7 and 1.3 kg (1.5 to 3 lbs). Features: proprietary commercial operating systems. Examples: HP200LX. 33..22..55.. PPeerrssoonnaall DDiiggiittaall AAssssiissttaannttss ((PPDDAAss))//HHaannddhheelldd PPCCss ((HHPPCCss)) Weight below 0.7 kg (1.5 lbs). Features: proprietary commercial operating systems and often non-Intel CPU (PalmOS, EPOC32, GEOS, Windows CE). Examples: Newton Message Pad, Palm III (former Pilot), Psion Series 5, CASIO Z-7000. Palmtops and PDAs are currently not covered in this HOWTO. Anyway it may be useful therefore too. There is also a PalmOS-HOWTO (former Pilot-HOWTO) by David H. Silber and the Newton and Linux Mini-HOWTO http://privat.swol.de/ReinholdSchoeb/Newton/Newton_and_Linux-mini- HOWTO.html . I just include some links, most of them are from Kenneth E. Harker's page http://www.cs.utexas.edu/users/kharker/linux-laptop/ : 1. Newtl: Newton/Linux Communications System Newtl allows a Linux machine to communicate with a Newton PDA. Automatically send e- mail, print, and fax outboxes through your Linux machine, and more. 2. PilotLink and XCoPilot PilotLink is an utility that performs data transfers from 3com PalmPilot handheld computers to your Linux machine. XCoPilot is an emulator of the PalmPilot operating system that runs under Linux. 3. PalmVNC PalmVNC is an implementation of the Virtual Network Client architecture that will allow you to use a Linux or other UNIX machine to put up a (tiny) X Window on a 3COM PalmPilot. 4. PDAs and infrared remote control, see Hiromu Okada http://hp.vector.co.jp/authors/VA005810/remocon/remocone.htm 5. AFAIK you can run Linux on the IBM PC110 (a tiny PC handheld that's no longer manufactured). There's a HOWTO on it running around somewhere but I don't have an URL. 6. For more information on Virtual Network Computing (VNC), see http://http://www.uk.research.att.com/vnc/ . 7. There is also Handheld Systems(TM) On-line Archives at http://www.cdpubs.com/hhsys/archives.html .and a search engine about palmtop related topics at http://www.palmtop.net/ . 33..22..66.. CCeelllluullaarr PPhhoonneess,, CCaallccuullaattoorrss,, DDiiggiittaall CCaammeerraass,, WWeeaarraabbllee CCoomm­­ ppuuttiinngg These devices are not covered in this text. For general information about Embedded Systems, see http://www.embedded.com . For Linux information, see ELKS http://www.linux.org.uk/ELKS-Home/index.html and the uCLinux project at http://ryeham.ee.ryerson.ca/uClinux . Also related to this topic but not covered yet seems wearable computing, see http://lcs.www.media.mit.edu/projects/wearables/ for further information. 33..33.. LLiinnuuxx FFeeaattuurreess Due to a lack of support by some hardware manufacturers, not every feature of a laptop is always supported or fully operational. The main devices which may cause trouble are: graphic chip, IrDA port, sound card, PCMCIA controller , PnP devices and internal modem. Please try to get as much information about these topics before buying a laptop. But often it isn't quite easy to get the necessary information. Sometimes even the specifications or the hotline of the manufacturer aren't able to provide the information. Therefore I have included a Linux Compatibility Check chapter in the Hardware In Detail sections below. Depending on your needs, you might investigate one of the vendors that provide laptops pre-loaded with Linux. By purchasing a pre-loaded Linux laptop, much of the guesswork and time spent downloading additional packages could be avoided. 33..44.. MMaaiinn HHaarrddwwaarree FFeeaattuurreess Besides its Linux features, there often are some _m_a_i_n _f_e_a_t_u_r_e_s which have to be considered when buying a laptop. For _L_i_n_u_x _f_e_a_t_u_r_e_s please see the Hardware In Detail section below. 33..44..11.. WWeeiigghhtt Don't underestimate the weight of a laptop. This weight is mainly influenced by: 1. screen size 2. battery type 3. internal components, such as CD drive, floppy drive 4. power supply 33..44..22.. DDiissppllaayy Laptops come with one of two types of displays: _a_c_t_i_v_e matrix (TFT) and _p_a_s_s_i_v_e matrix (DSTN). Active matrix displays have better color and contrast, but usually cost more and use more power. Also consider the screen size. Laptops may be purchased with screens up to 15". A bigger screen weighs more, costs more, and is harder to carry, but is good for a portable desktop replacement. 33..44..33.. BBaatttteerriieess The available battery types are _L_i_t_h_i_u_m _I_o_n _(_L_i_I_o_n_), _N_i_c_k_e_l _M_e_t_a_l _H_y_b_r_i_d _( _N_i_M_h_) and _N_i_c_k_e_l _C_a_d_m_i_u_m _(_N_i_C_d_). LiIon batteries are the most expensive ones but a lot lighter than NiCd for the same energy content, and have minimal -- but present -- memory effects. NiMH is better than NiCd, but still rather heavy and does suffer some (although less than NiCd) memory effects. Unfortenately most laptops come with a proprietary battery size. So they are not interchangeable between different models. 33..44..44.. CCPPUU 33..44..44..11.. SSuuppppoorrtteedd CCPPUU FFaammiilliieess For details about systems which are supported by the Linux Kernel, see the Linux FAQ http://www.cl.cam.ac.uk/users/iwj10/linux-faq/ . 1. i286: Linux doesn't support this CPU family yet. But there are some efforts at ELKS http://www.linux.org.uk/ELKS-Home/index.html. Unfortunately this project seems on halt. But if you like, you may use Minix http://www.cs.vu.nl/~ast/minix.html one of the predecessors of Linux. Minix supports 8088 to 286 with as little as 640K memory. 2. i386: This covers PCs based on Intel-compatible processors, including Intel's 386, 486, Pentium, Pentium Pro and Pentium II, and compatible processors by AMD, Cyrix and others. Most of the currently available laptops use Intel compatible CPUs and have quite good Linux support. 3. m68k: This covers Amigas and Ataris having a Motorola 680x0 processor for x>=2; with MMU. AFAIK there is no laptop with such a CPU. But I'm not sure weither the early Mac laptops are falling into this category. Early PowerBooks did indeed have m68k chips in them. I think the DuoBook was what they were called. Not sure if they are Linux capable or not. 4. Alpha, Sparc, Sparc64, PowerPC, Arm and Hurd-i386 architectures: These are currently under construction. AFAIK there are only the Tadpole SPARC and ALPHA laptops, and some other ALPHA laptops available. For a current survey look at Kenneth E. Harker's _L_i_n_u_x _o_n _L_a_p_t_o_p_s _w_i_t_h_o_u_t _x_8_6 _F_a_m_i_l_y _P_r_o_c_e_s_s_o_r_s at http://www.cs.utexas.edu/users/kharker/linux-laptop/non-intel.html . 33..44..44..22.. MMiisscceellllaanneeoouuss At higher speed, a CPU consumes more power and generates more heat. Therefore, in many laptops a special low-power CMOS CPU is used. Usually, this special CPU doesn't use as much power as a similar processor used in a desktop. These special CPUs are also more expensive. As a side effect you may find that laptops with a desktop CPU often have a fan which seems quite loud. 33..44..55.. KKeeyybbooaarrdd QQuuaalliittyy Though you might use your desktop computer to do longer writings, a good keyboard can save you some headaches and finger-aches. Look especially for the location of special keys like: , , , , , and the cursor keys. 33..44..66.. PPrriiccee Laptops are quite expensive if you compare them with desktops. So you may decide between a brand or no-name product. Though I would like to encourage you to take a _n_o_-_n_a_m_e product, there are some caveats. I have experienced that laptops break often, so you are better off, when you have an after sales warranty, which is usually only offered with brand products. Or you may decide to take a _s_e_c_o_n_d _h_a_n_d machine. When I tried this, I discovered that the laptop market is changing quite often. A new generation is released approximately every three months (compared by CPU speed, harddisk capacity, screen size etc.). So laptops become old very quick. But this scheme often isn't followed by the prices for second hand laptops. They seem too expensive to me. Anyway if you plan on purchasing a second hand machine, review my recommendations on checking the machine. For German readers there is an online market place at http://www.hardware.de, which offers a good survey about current prices for second hand machines. 33..44..77.. PPoowweerr SSuuppppllyy If you travel abroad pay attention to the voltage levels which are supported by the power supply. 33..55.. SSoouurrcceess ooff MMoorree IInnffoorrmmaattiioonn Specifications and manufacturer support often are not helpful. Therefore you should retrieve information from other sources too: 1. Highly recommended is the survey by Kenneth E. Harker http://www.cs.utexas.edu/users/kharker/linux-laptop/ . 2. ftp://tsx-11.mit.edu/pub/linux/packages/laptops/ . 3. Hardware-HOWTO 4. open hardware - The Open Hardware Certification Program http://www.debian.org/OpenHardware/ 5. HARDWARE.doa.org - dedicated to the hardware aspects of (Linux) computing http://hardware.doa.org/ 6. How to Build a PC FAQ - excellent hardware overview by Billy Newsom http://www.motherboards.org/build.html 7. Last but not least the WWW itself. 33..66.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk 33..66..11.. RReellaatteedd HHOOWWTTOOss 1. Hardware-HOWTO 2. Kernel-HOWTO 3. PCMCIA-HOWTO 4. PCI-HOWTO 5. Plug-and-Play-mini-HOWTO 33..66..22.. CChheecckk MMeetthhooddss iinn GGeenneerraall If you can't find the necessary information through the above mentioned sources, you are on your own. Luckily, Linux provides many means to help. For details see the Hardware on Detail section below. In general you may use: 1. First of all the kernel itself. Look up what kind of hardware is detected by the kernel. You get this information during boot time or usually by dmesg or by looking into /var/log/messages. 2. If your kernel supports the /proc file system you may get detailed information about PCI devices by cat /proc/pci Please read the kernel documentation pci.txt. You may get further information about unknown PCI devices at the database from Craig Hart at http://members.hyperlink.net.au/~chart. From 2.1.82 kernels on you may use the lspci command from the pci-utils package. 3. To retrieve information about Plug-and-Play (PNP) devices use isapnp-tools . 4. Use scsi_info by David Hinds for SCSI devices or scsiinfo. If you don't want to install a complete Linux you may retrieve this information by using a micro Linux ( see appendix A). The package muLinux provides even a small systest program and TomsRtBt comes with memtest. To use memtest you have to copy it on a floppy dd if=/usr/lib/memtest of=/dev/fd0 and to reboot from this floppy. If your laptop came with Windows, you may determine a lot of hardware settings from the installation. Boot into DOS or Windows to get the information you need. Using Windows9x/NT to get hardware settings, basically boot Windows, then Start -> Settings -> Control Panel -> System -> Device Manager and write down everything, or make a hardcopy from the display using the key, plus keep a log of settings, hardware, memory, etc. Using MS-DOS and Windows3.1x you can use the command msd, which is an akronym for MicroSoft Diagnostics. Or you might try one of the numerous DOS shareware utilities: CHECK-IT, DR.HARD and others. 33..77.. BBuuyyiinngg aa SSeeccoonndd HHaanndd LLaappttoopp Some recommendations to check an used laptop, before buying it: 1. Review the surface of the case for visible damages. 2. Check the display for pixel faults. Maybe it's useful to take a magnifying glass therefore. 3. Do an IO stress-test, .e.g. with the tool bonnie. 4. You may use memtest and crashme to achieve a memory test. 5. Do a CPU stress test, e.g. with the tool Byte or by compiling a kernel. 6. Check the floppy drive by formatting a floppy. 7. Check the CD drive by reading a CD. 8. To check the battery seems difficult, because it needs some time: one charge and one work cycle. 9. To check the surface of the harddisk you may take e2fsck. There is also a Linux tool dosfsck or the other fsck tools. 10. To test the entire disk (non-destructively), time it for performance, and determine its size, as root do: time dd if=/dev/hda of=/dev/null bs=1024k . 11. Check wether the machine seems stolen. There is at least one database about stolen laptops in the WWW. But I have lost the URL. AFAIK there is no Linux tool like the DOS tools CHECK-IT, DR. HARD, SYSDIAG and others. These tools include many of the tests in one integrated suite. One of the best IMHO is the tool PC Diagnostics 95 made by Craig Hart http://members.hyperlink.net.au/~chart . Despite the 95 in its name it's plain DOS, tiny (76KB programm and 199KB data) reliable and free. Unfortenately it contains no check for the IrDA port. Please note this quotation from the disclaimer: "This program is written with the target audience being a trained, experienced technician. It is NOT designed to be used by those ignorant of computer servicing. Displays are not _p_r_e_t_t_y but functional. Information is not explained since we are not trying to educate. This software should be considered to be just like any other tool in a tech's toolbox. It is to be applied with care, in the right situation, in order to find answers to specific problems. If you are an end user who is less than confident of dealing with computer hardware, this is probably not a program for you." 33..88.. NNoo HHaarrddwwaarree RReeccoommmmeennddaattiioonnss It's difficult to give any recommendations for a certain laptop model in general. Your personal needs have to be taken into account. Also the market is changing very quickly. I guess every three months a new generation of laptops (according to harddisk space, CPU speed, display size, etc.) comes into the market. So I don't give any model or brand specific recommendations. 33..99.. LLaappttoopp DDiissttrriibbuuttiioonn 33..99..11.. RReeqquuiirreemmeennttss From the Battery-HOWTO I got this recommendation (modified by WH): A Message to Linux Distributors If you happen to be a Linux distributor, thank you for reading all this. Laptops are becoming more and more popular, but still most Linux distributions are not very well prepared for portable computing. Please make this section of this document obsolete, and make a few changes in your distribution. The installation routine should include a configuration, optimized for laptops. The _m_i_n_i_m_a_l _i_n_s_t_a_l_l is often not lean enough. There are a lot of things that a laptop user does not need on the road. Just a few examples. There is no need for three different versions of vi (as found in Suse Linux). Most portable systems do not need printing support (they will never be connected to a printer, printing is usually done with the desktop system at home). Quite a few laptops do not need any network support at all. Don't forget to describe _l_a_p_t_o_p_-_s_p_e_c_i_f_i_c _i_n_s_t_a_l_l_a_t_i_o_n _p_r_o_b_l_e_m_s, e. g. how to install your distribution without a cd-rom drive or how to setup the plip network driver. Add better _p_o_w_e_r _m_a_n_a_g_e_m_e_n_t and seamless _P_C_M_C_I_A _s_u_p_p_o_r_t to your distribution. Add a recompiled kernel and an alternative set of PCMCIA drivers with _a_p_m _s_u_p_p_o_r_t that the user can install on demand. Include a precompiled _a_p_m_d _p_a_c_k_a_g_e with your distribution. Add support for dynamically _s_w_i_t_c_h_i_n_g _n_e_t_w_o_r_k _c_o_n_f_i_g_u_r_a_t_i_o_n_s. Most Linux laptops travel between locations with different network settings (e. g. the network at home, the network at the office and the network at the university) and have to change the network ID very often. Changing a Linux system's network ID is a pain with most distributions. Add a _c_o_n_v_e_n_i_e_n_t _P_P_P _d_i_a_l_e_r with an address book, that does not try to start multiple copies of the PPP daemon if you click on the button twice (e.g., the RedHat usernet tool). It would be nice to have the PPP dialer also display the connection speed and some statistics. One nice command line dialer that autodetects modems and PPP services is wvdial from Worldvisions http://www.worldvisions.ca/wvdial/. 33..99..22.. RReeccoommmmeennddaattiioonn IMHO the Debian/GNU Linux http://www.debian.org has most of the desired features for a laptop installation. The distribution has a quite flexible installation tool. The installation process is well documented, especially concerning the methods which are useful at laptops. All the binaries are tiny, because they are stripped. And besides Debian/GNU Linux is free. Though other distributions are also worth to try them. 44.. IInnssttaallllaattiioonn MMeetthhooddss 44..11.. RReellaatteedd HHOOWWTTOOss 1. CDROM-HOWTO 2. Config-HOWTO 3. Diskless-mini-HOWTO 4. Installation-HOWTO 5. Pre-Installation-Checklist-mini-HOWTO 6. Update-mini-HOWTO 7. Hard-Disk-Upgrade-mini-HOWTO 8. Installation and getting started by Matt Welsh and others available at the LINUX DOCUMENTATION PROJECT http://metalab.unc.edu/LDP 9. Installing Debian Linux 2.1 For x86 by Bruce Perens, Sven Rudolph, Igor Grobman, James Treacy, Adam P. Harris ftp://ftp.debian.org/debian/dists/slink/main/disks- i386/current/install.html 10. Install-From-Zip-mini-HOWTO 11. ZIP-Drive-mini-HOWTO 44..22.. IInnttrroodduuccttiioonn From the Battery-HOWTO:"Installing and using Linux on a laptop is usually no problem at all, so go ahead and give it a try. Unlike some other operating systems, Linux still supports and runs well on even very old hardware, so you might give your outdated portable a new purpose in life by installing Linux on it." One of the great benefits of Linux are its numerous and flexible installation features, which I don't want to describe in detail. Instead I try to focus on _l_a_p_t_o_p _s_p_e_c_i_f_i_c _m_e_t_h_o_d_s, which are necessary only in certain circumstances. Most current distributions support installation methods which are useful for laptops, including installation from CD-ROM, via PCMCIA and NFS (or maybe SMB). Please see the documents which are provided with these distributions for further details or take a look at the above mentioned manuals and HOWTOs. 44..33.. FFrroomm aa BBoooott FFllooppppyy pplluuss CCDD--RROOMM -- TThhee UUssuuaall WWaayy With modern laptops, the usual Linux installation (one Boot Floppy, one Support Floppy, one Packages CD-ROM) should be no problem, if there is are floppy drive and a CD-ROM drive available. Though with certain laptops you might get trouble if you can not simultaneously use the _f_l_o_p_p_y _d_r_i_v_e _a_n_d _C_D_-_R_O_M _d_r_i_v_e , or if the floppy drive is _o_n_l_y _a_v_a_i_l_a_b_l_e _a_s _a _P_C_M_C_I_A _d_e_v_i_c_e, as with the Toshiba Libretto 100. Some laptops support also booting and therefore installation completely from a CD drive, as reported for the SONY VAIO in the VAIO-HOWTO. Note: Check the BIOS for the CD boot option and make sure your Linux distribution comes on a bootable CD. Certain laptops will only boot _z_I_m_a_g_e kernels. _b_z_I_m_a_g_e kernels won't work. This is a known problem with the IBM Thinkpad 600 and Toshiba Tecra series, for instance. Some distributions provide certain boot floppies for these machines or for machines with limited memory resources, Debian/GNU Linux http://www.debian.org for instance. 44..44.. FFrroomm aa DDOOSS oorr WWiinnddoowwss PPaarrttiittiioonn aatt tthhee ssaammee MMaacchhiinnee This is a short description of how to install from a CD-ROM under DOS without using boot or supplemental floppy diskettes. This is especially useful for notebooks with _s_w_a_p_p_a_b_l_e _f_l_o_p_p_y _a_n_d _C_D_-_R_O_M _c_o_m_p_o_n_e_n_t_s (if both are mutually exclusive) or if they are _o_n_l_y _a_v_a_i_l_a_b_l_e _a_s _P_C_M_C_I_A _d_e_v_i_c_e_s. I have taken this method from "Installing Debian GNU/Linux 2.1 For Intel x86 - Chapter 5 Methods for Installing Debian" http://www.debian.org : 1. Get the following files from your nearest Debian FTP mirror and put them into a directory on your DOS partition: resc1440.bin drv1440.bin base2_1.tgz root.bin linux install.bat and loadlin.exe. 2. Boot into DOS (not Windows) without any drivers being loaded. To do this, you have to press at exactly the right moment. 3. Execute install.bat from that directory in DOS. 4. Reboot the system and install the rest of the distribution, you may now use all the advanced features such as PCMCIA, PPP and others. This should work for other distributions with similar changes. For RedHat see How to Install from CD-ROM without Boot and Supplemental Disks . Some new laptops may be able to boot a Linux distribution on a bootable CD-ROM (e.g., RedHat). This would allow installation without a floppy disk drive. 44..55.. FFrroomm aa SSeeccoonndd MMaacchhiinnee WWiitthh aa MMiiccrroo LLiinnuuxx OOnn aa FFllooppppyy 44..55..11.. IInnttrroodduuccttiioonn Because of their small or non-existent footprint, micro-Linuxes are especially suited to run on laptops -- particularly if you use a company-provided laptop running Windows9x/NT. Or for installation purposes using another non Linux machine. There are several _m_i_c_r_o Linux distributions out there that boot from one or two floppies and run off a ramdisk. See appendix A for a listing of distributions. I tried the following with muLinux to clone my HP OmniBook 800 to a COMPAQ Armada 1592DT. Thanks to Michele Andreoli, maintainer of muLinux for his support. Since muLinux doesn't support PCMCIA yet, you may use TomsRtBt instead. In turn TomsRtBt doesn't support PPP but provides slip. I have described how to copy an already existing partition, but it might be also possible to achieve a customized installation. Note: Usually you would try to achieve an installation via NFS, which is supported by many distributions. Or if your sources are not at a Linux machine you might try SMB, which is also supported by muLinux . 44..55..22.. PPrreerreeqquuiissiitteess You need two machines equipped with Linux. With the laptop (client/destination) on which you want to install Linux use the muLinux floppy. The other machine (server/source) may be a usual Linux box or also using muLinux. Though its low transfer rate I use a serial null modem cable because its cheap. You may apply the according method using a PCMCIA network card and a crossover network cable or a HUB, or a parallel "null modem" cable and PLIP. As the basic protocol I used PPP, but you may also use SLIP. For the data-transfer I used nc, you may use ftp, tftp, rsh, ssh, dd, rcp, kermit, NFS, SMB and others. Basic requirements are: 1. A good knowledge about using Linux. You have to know exactly what you are doing, if not you might end destroying former installations. 2. A nullmodem serial cable. 44..55..33.. SSoouurrccee MMaacchhiinnee At your _s_o_u_r_c_e machine issue the following commands (attention: IP address, port number, partition and tty are just examples!): 1. Edit /etc/ppp/options, it should contain only: ___________________________________________________________________ /dev/ttyS0 115200 passive ___________________________________________________________________ 2. With muLinux versions 3.x you may even use the convenient command setup -f ppp . 3. Start PPP: pppd . 4. Configure the PPP network device: ifconfig ppp0 192.168.0.1 . 5. Add the default route: route add default gw 192.168.0.1 . 6. Check the network connection: ping 192.168.0.2, though the destination machine isn't up yet. 7. Start the transfer from another console, remember : cat /dev/hda2 | gzip -c | nc -l -p 5555 . 8. After the transfer (there are no more harddisk writings) stop the ping: killall ping . 44..55..44.. DDeessttiinnaattiioonn MMaacchhiinnee At the _d_e_s_t_i_n_a_t_i_o_n machine issue: 1. Edit /etc/ppp/options, it should contain only: ___________________________________________________________________ /dev/ttyS0 115200 passive ___________________________________________________________________ 2. With muLinux versions 3.x you may even use the convenient command setup -f ppp . 3. Start PPP: pppd . 4. Configure the PPP network device: ifconfig ppp0 192.168.0.2 . 5. Add the default route: route add default gw 192.168.0.2 . 6. Check the network connection, by pinging to the source machine: ping 192.168.0.1 . 7. Change to another console and get the data from the server: nc 192.168.0.1 5555 | gzip -dc >/dev/hda4 . 8. 400 MB may take app. 6 hours, but YMMV. 9. Stop the transfer, when it is finished with: . 10. After the transfer is completed, stop the ping: killall ping . 44..55..55.. CCoonnffiigguurraattiioonn ooff tthhee SSoouurrccee MMaacchhiinnee aafftteerr tthhee TTrraannssffeerr 1. Edit /etc/fstab . 2. Edit /etc/lilo.conf and /etc/lilo.msg and start lilo . 3. Set the new root device to the kernel: rdev image root_device . 44..55..66.. MMiisscceellllaanneeoouuss 1. bzip2 didn't work, probably because I wasn't able to make it read from stdin . 2. Since rshd, sshd, ftpd daemons are not available with muLinux you have to build your own daemon with nc, as described above. 3. I had to set up both PPP sides very quick or the connection broke, I don't know why. 4. Speed optimization has to be done, asyncmap 0 or local? 5. I checked this only with a destination partition greater than the source partition. Please check dd instead of cat therefore. 6. Don't mount the destination partition. 44..66.. FFrroomm aa SSeeccoonndd MMaacchhiinnee WWiitthh aa 22..55"" HHaarrdd DDiisskk AAddaapptteerr From Adam Sulmicki adam@cfar.unc.edu I got this hint: Most but not all harddisks in laptops are removable, but this might be not an easy task. You could just buy one of those cheap 2.5" IDE converters/adapters which allow you to connect this harddisk temporarily to a PC with IDE subsystem, and install Linux as usual using that PC. You may do so using the harddisk as the first IDE drive or besides as the second IDE drive. But than you need to be sure that lilo writes to the right partition. Also you have to make sure that you use the same translation style as your laptop is going to use (i.e. LBA vs. LARGE vs. CHS ). You find additional information in the Hard-Disk-Upgrade-mini-HOWTO. You might copy an existing partition, but it is also possible to achieve a customized installation. 44..77.. FFrroomm aa PPCCMMCCIIAA DDeevviiccee Since I don't have a laptop which comes with a PCMCIA _f_l_o_p_p_y _d_r_i_v_e (for instance Toshiba Libretto 100), I couldn't check this method. Please see the chapter Booting from a PCMCIA Device in the PCMCIA- HOWTO. Also I couldn't check whether booting from a PCMCIA _h_a_r_d_d_i_s_k is possible. Anyway, when you are able to boot from a floppy and the laptop provides a PCMCIA slot, it should be possible to use different PCMCIA cards to connect to another machine, to an external SCSI device, different external CD and ZIP drives and others. Usually these methods are described in the documentation which is provided with the distribution. 44..88.. FFrroomm aa PPaarraalllleell PPoorrtt DDeevviiccee ((ZZIIPP DDrriivvee,, CCDD DDrriivvee)) I couldn't check this method by myself, because I don't have such a device. Please check the according Install-From-Zip-mini-HOWTO and CD- HOWTO. Also I don't know how much these installation methods are supported by the Linux distributions or the micro Linuxes. I suppose you have to fiddle around a bit to get this working. 55.. HHaarrddwwaarree IInn DDeettaaiill 55..11.. PPCCMMCCIIAA CCoonnttrroolllleerr 55..11..11.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk With the probe command, which is included in the PCMCIA-CS package by David Hinds you can get the type of the PCMCIA controller. Often this shows also up with cat /proc/pci . 55..11..22.. RReellaatteedd HHOOWWTTOOss 1. PCMCIA-HOWTO 55..11..33.. PPCCMMCCIIAA CCoonnffiigguurraattiioonn -- SSuurrvveeyy In the mailing lists where I'm a member, the question "How can I set up PCMCIA support, after the Linux installation?" comes up sometimes. Therefore I try to give a short survey. But the authoritative source for the latest information about the _P_C_M_C_I_A _C_a_r_d _S_e_r_v_i_c_e_s _f_o_r _L_i_n_u_x, including documentation, files, and generic PCMCIA information is the Linux PCMCIA Information Page . For problems with PCMCIA and APM see the APM chapter. 55..11..33..11.. SSooffttwwaarree 1. Read the PCMCIA HOWTO, usually included in the PCMCIA-CS package. 2. Install the newest available PCMCIA-CS package, if you take a rpm or deb package it is quite easy. 3. If necessary, install a new kernel. Note: With 2.2.x kernels PCMCIA kernel support seems no longer necessary. I had no time to look this up yet. Please read the according documents. 4. Make sure your kernel has module support and PCMCIA support enabled (and often APM support) 5. Make sure your kernel also includes support for the cards you want to use, e.g. network support for a NIC card, serial support for a modem card, SCSI support for a SCSI card and so on. 55..11..33..22.. PPCCMMCCIIAA CCoonnttrroolllleerr 1. Use the probe command to get information whether your PCMCIA controller is detected or not. 2. Edit the file /etc/sysconfig/pcmcia. It should include PCMCIA=y and the type of your PCMCIA controller, e.g. PCIC=i82365. 3. Start the PCMCIA services typically via /etc/init.d/pcmcia start. If you get two high beeps, everything should be fine. 4. If something doesn't work, check the messages in /var/log/messages . 55..11..33..33.. PPCCMMCCIIAA CCaarrdd 1. Check your card with cardctl ident . 2. If your card is not in /etc/pcmcia/config, edit this file accordingly. 3. If you use X, you can use cardinfo to insert, suspend, or restart a PCMCIA card via a nice graphical interface. 55..22.. IInnffrraarreedd PPoorrtt 55..22..11.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk To get the IrDA port of your laptop working with Linux/IrDA you may use StandardInfraRed (SIR) or FastInfraRed (FIR). 55..22..11..11.. SSIIRR Up to 115.200bps, the infrared port emulates a serial port like the 16550A UART. This will be detected by the kernel serial driver at boot time, or when you load the serial module. If infrared support is enabled in the BIOS, for most laptops you will get a kernel message like: ______________________________________________________________________ Serial driver version 4.25 with no serial options enabled ttyS00 at 0x03f8 (irq = 4) is a 16550A #first serial port /dev/ttyS0 ttyS01 at 0x3000 (irq = 10) is a 16550A #e.g. infrared port ttyS02 at 0x0300 (irq = 3) is a 16550A #e.g. PCMCIA modem port ______________________________________________________________________ 55..22..11..22.. FFIIRR If you want to use up to 4Mbps, your machine has to be equipped with a certain FIR chip. You need a certain Linux/IrDA driver to support this chip. Therefore you need exact information about the FIR chip. You may get this information in one of the following ways: 1. Read the _s_p_e_c_i_f_i_c_a_t_i_o_n of the machine, though it is very rare that you will find enough and reliable information there. 2. Try to find out wether the FIR chip is a _P_C_I device. Do a cat /proc/pci . The according files for 2.2.x kernels are in /proc/bus/pci . Though often the PCI information is incomplete. You may find the latest information about PCI devices and vendor numbers in the kernel documentation usually in /usr/src/linux/Documentation or at the page of Craig Hart http://members.hyperlink.net.au/~chart . From kernel 2.1.82 on, you may use lspci from the pci-utils package, too. 3. Use the _D_O_S _t_o_o_l CTPCI330.EXE provided in ZIP format by the German computer magazine CT http://www.heise.de/ct/ftp/pci.shtml . The information provided by this program is sometimes better than that provided by the Linux tools. 4. Try to get information about _P_l_u_g_-_a_n_d_-_P_l_a_y _(_P_n_P_) devices. Though I didn't use them for this purpose yet, the isapnp tools, could be useful. 5. If you have installed the _L_i_n_u_x_/_I_r_D_A _s_o_f_t_w_a_r_e load the FIR modules and watch the output of dmesg, whether FIR is detected or not. 6. Another way how to figure it out explained by Thomas Davis (modified by WH): "Dig through the FTP site of the vendor, find the _W_i_n_d_o_w_s_9_x _F_I_R _d_r_i_v_e_r_s, and they have (for a SMC chip): ___________________________________________________________________ -rw-rw-r-- 1 ratbert ratbert 743 Apr 3 1997 smcirlap.inf -rw-rw-r-- 1 ratbert ratbert 17021 Mar 24 1997 smcirlap.vxd -rw-rw-r-- 1 ratbert ratbert 1903 Jul 18 1997 smcser.inf -rw-rw-r-- 1 ratbert ratbert 31350 Jun 7 1997 smcser.vxd ___________________________________________________________________ If in doubt, always look for the .inf/.vxd drivers for Windows95. Win­ dows95 doesn't ship with _ANY_ FIR drivers. (they are all third party, mostly from Counterpoint, who was assimilated by ESI)." 7. Also Thomas Davis found a package of small _D_O_S _u_t_i_l_i_t_i_e_s _m_a_d_e _b_y _S_M_C. Look at http://www.smsc.com/ftppub/chips/appnote/ir_utils.zip . The package contains FINDCHIP.EXE. And includes a FIRSETUP.EXE utility that is supposed to be able to set all values except the chip address. Furthermore it contains BIOSDUMP.EXE, which produces this output: Example 1 (from a COMPAQ Armada 1592DT) ___________________________________________________________________ In current devNode: Size = 78 Handle = 14 ID = 0x1105D041 = 'PNP0511' -- Generic IrDA SIR Types: Base = 0x07, Sub = 0x00, Interface = 0x02 Comm. Device, RS-232, 16550-compatible Attribute = 0x80 CAN be disabled CAN be configured BOTH Static & Dynamic configuration Allocated Resource Descriptor Block TAG's: TAG=0x47, Length=7 I/O Tag, 16-bit Decode Min=0x03E8, Max=0x03E8 Align=0x00, Range=0x08 TAG=0x22, Length=2 IRQ Tag, Mask=0x0010 TAG=0x79, Length=1 END Tag, Data=0x2F ___________________________________________________________________ Result 1: Irq Tag, Mask (bit mapped - ) = 0x0010 = 0000 0000 0000 0001 0000 so, it's IRQ 4. (start at 0, count up ..), so this is a SIR only device, at IRQ=4, IO=x03e8. Example 2 (from an unknown machine) ______________________________________________________________________ In current devNode: Size = 529 Handle = 14 ID = 0x10F0A34D = 'SMCF010' -- SMC IrCC Types: Base = 0x07, Sub = 0x00, Interface = 0x02 Comm. Device, RS-232, 16550-compatible Attribute = 0x80 CAN be disabled CAN be configured BOTH Static & Dynamic configuration Allocated Resource Descriptor Block TAG's: TAG=0x47, Length=7 I/O Tag, 16-bit Decode Min=0x02F8, Max=0x02F8 Align=0x00, Range=0x08 TAG=0x22, Length=2 IRQ Tag, Mask=0x0008 TAG=0x47, Length=7 I/O Tag, 16-bit Decode Min=0x02E8, Max=0x02E8 Align=0x00, Range=0x08 TAG=0x2A, Length=2 DMA Tag, Mask=0x02, Info=0x08 TAG=0x79, Length=1 END Tag, Data=0x00 ______________________________________________________________________ Result 2: a) it's a SMC IrCC chip b) one portion is at 0x02f8, has an io-extent of 8 bytes; irq = 3 c) another portion is at 0x02e8, io-extent of 8 bytes; dma = 1 (0x02 =0000 0010) Thomas Davis has placed some device information at http://www.jps.net/tadavis/irda/devids.txt . WARNING: The package is not intended for the end user, and some of the utilities could be harmful. The only documentation in the package is in M$ Word format. Linux users may read this with catdoc, available at http://www.fe.msk.ru/~vitus/catdoc/ . 8. Use the _D_e_v_i_c_e _M_a_n_a_g_e_r of Windows9x/NT. 9. You may also use the _h_a_r_d_w_a_r_e _s_u_r_v_e_y_s mentioned below. 10. And as a last ressort, you may even _o_p_e_n _t_h_e _l_a_p_t_o_p and look at the writings at the chipsets themselfs. 55..22..11..33.. HHaarrddwwaarree SSuurrvveeyy I have made a hardware survey at http:/www.snafu.de/~wehe/ir_misc.html. This list also contains information about infrared capable devices which are not mentioned here (mice, printers, remote control, transceivers, etc.). To make this list more valuable, it is necessary to collect more information about the infrared devices in different hardware. You can help by sending me a short e-mail containing the exact name of the hardware you have and which type of infrared controller is used. Please let me know also how well Linux/IrDA worked (at which tty, port and interrupt it works and the corresponding infrared device, e.g. printer, cellular phone). Also you can help by contributing detailed technological information about some infrared devices, which is necessary for the development of drivers for Linux. 55..22..22.. RReellaatteedd HHOOWWTTOOss 1. Linux/IR-HOWTO 55..22..33.. IIrrDDAA CCoonnffiigguurraattiioonn -- SSuurrvveeyy 55..22..33..11.. IIrrDDAA The Linux infrared support is still experimental, but rapidly improving. I try to describe the installation in a short survey. Please read my Linux/IR-HOWTO http://www.snafu.de/~wehe/index_li.html for detailed information. 55..22..33..11..11.. KKeerrnneell 1. Get a 2.2.x kernel. 2. Compile it with all IrDA options enabled. 3. Also enable experimental, sysctl, serial and network support. 55..22..33..11..22.. SSooffttwwaarree 1. Get the Linux/IrDA software irda-utils at The Linux IrDA Project . 2. Untar the package. 3. Do a make depend; make all; make install 55..22..33..11..33.. HHaarrddwwaarree 1. Enable the IrDA support in the BIOS. 2. Check for SIR or FIR support, as described above. 3. Start the Linux/IrDA service with irmanager -d 1 . 4. Watch the kernel output with dmesg . 55..22..33..22.. LLiinnuuxx RReemmoottee CCoonnttrrooll -- LLiiRRCC Linux Remote Control http://fsinfo.cs.uni-sb.de/~columbus/lirc/ is maintained by Christoph Bartelmus. "Lirc is a package that supports receiving and sending IR signals of the most common IR remote controls. It contains a device driver for hardware connected to the serial port, a daemon that decodes and sends IR signals using this device driver, a mouse daemon that translates IR signals to mouse movements and a couple of user programs that allow to control your computer with a remote control." I don't have valid information about how much infrared remote control is working with laptop infrared devices. 55..33.. GGrraapphhiicc CChhiipp 55..33..11.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk 55..33..11..11.. VViiddeeoo MMooddee The tool SuperProbe is part of XFree86 and is able to check many graphic chips. Please read the documentation carefully, because it might crash your hardware. From man SuperProbe: "SuperProbe is a a program that will attempt to determine the type of video hardware installed in an EISA/ISA/VLB-bus system by checking for known registers in various combinations at various locations (MicroChannel and PCI machines may not be fully supported; many work with the use of the -no_bios option). This is an error-prone process, especially on Unix (which usually has a lot more esoteric hardware installed than MS-DOS system do), so SuperProbe may likely need help from the user. ... At this time, SuperProbe can identify MDA, Hercules, CGA, MCGA, EGA, VGA, and an entire horde of SVGA chipsets (see the -info option, below). It can also identify several HiColor/True-color RAMDACs in use on SVGA boards, and the amount of video memory installed (for many chipsets). It can identify 8514/A and some derivatives, but not XGA, or PGC (although the author intends to add those capabilities). Nor can it identify other esoteric video hardware (like Targa, TIGA, or Microfield boards).": For testing reasons start the X server with X 2> . And try to change the resolution by typing <+> or <->. Note: the + or - sign have to be taken from the numeric pad, which can be emulated at the letter pad by some laptops. 55..33..11..22.. TTeexxtt MMooddee Just watch the display and determine if it works properly. If not, try to enable different video modes at startup time. Setting up X can sometimes be an exercise in trial and error. 55..33..22.. RReellaatteedd HHOOWWTTOOss 1. XFree86-HOWTO 2. XFree86-Video-Timings-HOWTO 3. XFree86-XInside-HOWTO 4. X-Big-Cursor-mini-HOWTO (useful when running X on a notebook with low contrast LCD) 5. Keyboard-and-Console-HOWTO 6. vesafb-mini-HOWTO 55..33..33.. SSuurrvveeyy XX--SSeerrvveerrss You might discover that some features of your laptop are not supported by XFree86, e.g. high resolutions, accelerated X or an external monitor. Therefor I give a survey of available X servers. 1. XFree86 http://www.xfree86.org 2. Xinside aka AcceleratedX http://www.xig.com , commercial 3. SciTech http://www.scitechsoft.com , commercial 4. VESA Frame-Buffer-Device, available with 2.2.x kernels and XFree86 3.3.2 55..33..44.. RReessoouurrcceess You may find a survey about X windows resources at Kenneth E. Harker's page http://www.cs.utexas.edu/users/kharker/linux-laptop/. 55..33..55.. EExxtteerrnnaall MMoonniittoorr There are several different methods to activate support for an external monitor: as a _B_I_O_S _o_p_t_i_o_n or during runtime with a _k_e_y_s_t_r_o_k_e e.g. +. Maybe you have to edit /etc/XF86Config by configuring int_disp and ext_disp. If you can't get this to work with XFree, try a demo version of the commercial X servers mentioned above. Also check with the RedHat and SuSE WWW sites as they may have new, binary-only, X servers that may work with your laptop. 55..33..66.. MMiisscceellllaanneeoouuss Sometimes you may encounter a display not working properly in text mode. Currently I don't have any recommendations, please see Keyboard- Console-HOWTO. Take care of the _b_a_c_k_l_i_g_h_t AFAIK this device can only bear a limited number of uptime circles. So avoid using screensavers too much. For problems with X windows and APM please see the APM chapter. 55..44.. SSoouunndd 55..44..11.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk The only way I know to check this, is to compile the different sound drivers into the kernel and check whether they are detected or not. The best way to do so, is to compile them as modules because it's easier to load different parameters such as interrupts and IO ports than. For the new 2.2.x kernels, read the /usr/src/linux/Documentation/sound/Introduction document by Wade Hampton. This document may help you get started with sound. Also, you might try one of the commercial sound drivers mentionend below. 55..44..22.. RReellaatteedd HHOOWWTTOOss 1. Sound-HOWTO 2. Visual-Bell-mini-HOWTO 55..44..33.. SSuurrvveeyy SSoouunndd DDrriivveerrss Many new laptops come with 16-bit sound. But MWave and some other sound technologies won't work or are very hard to get working, e.g. booting to DOS, loading a driver, then using the soundcard as a standard SB-PRO. So you might need a commercial sound driver. With the recent announcement of Linux support by IBM, it would be GREAT if IBM supported the MWave under Linux (hint, hint...). As a last ressort you may try the speaker module pcsnd, which tries to emulate a soundcard. 1. Kernel Sound Driver by Hannu Savolainen 2. ALSA Advanced Linux Sound Architecture , commercial or at least non-GPL (since I found a Debian/GNU Linux package I'm not sure anymore, about the commercial status) 3. OSS UNIX Sound System Lite / OSS, commercial or at least non-GPL (since the 2.2.x kernels I'm not sure about the commercial status), also available from http://www.opensound.com . 55..55.. KKeeyybbooaarrdd 55..55..11.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk Usually there are no problems with Linux and the keyboard. Though there are two minor caveats: First the setleds program might not work. Second the key mapping might not fit your needs. Some Unix users and vi users expect to find the key to the left of the key. Many PC-type keyboards have the key there. You may use xmodmap or loadkeys to re-map the keyboard. Some laptops (e.g., Toshiba) allow you to swap the and keys. Mark Alexander offered this solution in the linux-laptop mailing list: On RedHat, it's a one-line patch to /usr/lib/kbd/keytables/us.map , or whatever file is referenced in /etc/sysconfig/keyboard: ______________________________________________________________________ *** us.map~ Tue Oct 31 14:00:07 1995 --- us.map Thu Aug 28 13:36:03 1997 *************** *** 113,119 **** keycode 57 = space space control keycode 57 = nul alt keycode 57 = Meta_space ! keycode 58 = Caps_Lock keycode 59 = F1 F11 Console_13 control keycode 59 = F1 alt keycode 59 = Console_1 --- 113,119 ---- keycode 57 = space space control keycode 57 = nul alt keycode 57 = Meta_space ! keycode 58 = Control keycode 59 = F1 F11 Console_13 control keycode 59 = F1 alt keycode 59 = Console_1 ______________________________________________________________________ 55..55..22.. SSeeccoonndd KKeeyybbooaarrdd A second keyboard can be attached using the PS/2 port (I don't know whether this is possible via the serial port). Also there is one laptop with a detachable keyboard the Siemens Scenic Mobile 800. This machine uses an infrared connection to the keyboard, but I don't know whether this works with Linux. WARNING: Don't plug the external keyboard in while the laptop is booted, or plug the mouse in the keyboard port and the keyboard in the mouse port. On a Toshiba, this caused one user to have to completely shutdown the laptop, remove the keyboard/mouse, and do a cold reboot. 55..66.. MMiiccee aanndd tthheeiirr RReellaattiivveess 55..66..11.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk You may check your mouse with the mev command from the GPM package. 55..66..22.. RReellaatteedd HHOOWWTTOOss 1. 3-Button-Mouse-mini-HOWTO for serial mice 2. Bus-Mouse-HOWTO 3. Kernel-HOWTO 55..66..33.. MMiiccee SSppeecciieess 1. Trackpad, Touchpad, used with the majority of current laptops 2. Trackball, e.g. COMPAQ LTE 3. Pop-up-Mouse, e.g. HP OmniBook 800 4. Trackpoint, Mouse-Pin, e.g. IBM ThinkPad and Toshiba 5. 3 Button Mice, e.g. IBM Thinkpads at least the 600s. I have heard rumor about a 3 button mouse for Texas Instruments Travelmates, but couldn't verify this yet. Most of the mice used in laptops are PS/2 mice (actually I don't know one with another mouse protocol). You may communicate with the PS/2 mouse through /dev/psaux or /dev/psmouse. If you use X windows this device and the protocol has to be set in /etc/XF86Config, too. In earlier releases, sometimes the GPM mouse manager and X windows had trouble sharing a mouse when enabled at the same time. But AFAIK this is no problem anymore for the latest versions. 55..66..44.. RReessoouurrcceess Synaptics Touchpad Linux Driver The Synaptics touchpad is a pointing device used in notebooks by Acer, Compaq, Dell, Gateway, Olivetti, Texas Instruments, Winbook, and others. Linux Compaq Concerto Pen Driver The latest version of the Linux Compaq Concerto Pen Driver is available from its author's home page. 55..66..55.. EExxtteerrnnaall MMoouussee For better handling, e.g. with a 3 button mouse you may use an external mouse. This usually a serial mouse or a PS/2 mouse, according to the port your laptop offers. Usually this is no problem. WARNING: Don't plug in the external mouse while powered up. If you have separate mouse and keyboard ports, make sure you plug the mouse in the mouse port and the keyboard in the keyboard port. If you don't, you may have to do a hard reboot of the laptop to get it to recover. 55..77.. AAddvvaanncceedd PPoowweerr MMaannaaggmmeenntt ((AAPPMM)) 55..77..11.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk From the Battery-Powered-mini-HOWTO " .. for APM to work on any notebook or energy-conscious desktop, the system BIOS ROM in the machine must support the APM standard. Furthermore, for APM to work with the Linux operating system, the system BIOS ROM must support either the 1.0 or 1.1 version of the APM standard, and it must also support 32-bit protected mode connections. A system that supports APM 1.1 is preferred, as it provides more features that the device driver and supporting utilities can take advantage of." You may get information about the APM version with the dmesg command and in the /proc/apm file. 55..77..22.. IInnttrroodduuccttiioonn APM support consists of two parts: _k_e_r_n_e_l support and _u_s_e_r_-_l_a_n_d support. For _k_e_r_n_e_l support, enable the parameters in the corresponding kernel section. AFAIK not all features work with laptops. AFAIK the feature CONFIG_APM_POWER_OFF works with most laptops. The utilities for _u_s_e_r_l_a_n_d support may be found at http://worldvisions.ca/~apenwarr/apmd/. APMD is a set of programs that control the Advanced Power Management system found in most modern laptop computers. If you run a 2.2.x kernel and want to experiment, Gabor Kuti has made a kernel patch that allows you to _h_i_b_e_r_n_a_t_e any Linux system to disk, even if your computers APM BIOS doesn't support it directly. IMHO you don't need this features if your laptop provides a function key to invoke suspend mode directly. When you first install Linux, you will probably have to recompile the kernel. The kernel that came with your distribution probably does not have APM enabled. Please see the Battery Powered Linux Mini-HOWTO by Hanno Mueller http://www.lava.de/~hanno/ and the page of Kenneth E. Harker http://www.cs.utexas.edu/users/kharker/linux-laptop/ for detailed information. Richard Gooch wrote: I'have had a look at the beta version of apmd, and I still don't like it, because: · Only supports one command to run at suspend time. · Doesn't distinguish between user and system suspends. · doesn't provide a way to disable policy (the sync(); sleep(0) ; sync(); sleep(1); sequence) · Does not document extra features. · And I'm not sure that what we want is a single super daemon. A collection of smaller daemons might be better, since it allows people to pick and choose. A super daemon is bloat for those who only want one small feature. Though this topic was discussed controversly Richard Gooch has put together a package suspendd at http://www.atnf.csiro.au/~rgooch/linux/ . Also, have a look at apmcd (apm based crontab) at ftp.binary9.net/pub/linux/apmcd-1.15.tar.gz . A tool made by Nicolas J. Leon http://mrnick.binary9.net/. Note: I didn't check wether this features are merged into one package (apmd eventually) already. 55..77..33.. CCaavveeaattss If you have another operating system preinstalled or use another operating system at the same disk, make sure there is no "hibernation" or "suspend" tool installed, which could severely interfere with Linux, e.g. it might use disk space which is occupied by Linux or vice versa. 55..77..44.. TTrroouubblleesshhoooottiinngg If your machine worked with 2.0.x kernels but not with the 2.2.x series, take this advice from Klaus Franken kfr@klaus.franken.de : "The default changed in 2.2. Search in the init-scripts for halt and change it to halt -p or poweroff. See man halt , if you don't have this option you need a newer version of halt." You may find it in the SysVinit package. PCMCIA Card Services and Advanced Power Management (from the PCMCIA- HOWTO): "Card Services can be compiled with support for APM (Advanced Power Management) if you've configured your kernel with APM support. ... The PCMCIA modules will automatically be configured for APM if a compatible version is detected on your system. Whether or not APM is configured, you can use cardctl suspend before suspending your laptop, and cardctl resume after resuming, to cleanly shut down and restart your PCMCIA cards. This will not work with a modem that is in use, because the serial driver isn't able to save and restore the modem operating parameters. APM seems to be unstable on some systems. If you experience trouble with APM and PCMCIA on your system, try to narrow down the problem to one package or the other before reporting a bug. Some drivers, notably the PCMCIA SCSI drivers, cannot recover from a suspend/resume cycle. When using a PCMCIA SCSI card, always use cardctl eject prior to suspending the system." Sometimes X windows and APM don't work smoothly together, the machine might even hang. A recommendation from Steve Rader: Some linux systems have their X server hang when doing apm -s. Folks with this affliction might want switch to the console virtual terminal then suspend chvt 1; apm -s as root, or, more appropiately.sudo chvt 1; sudo apm -s. I have these commands in a script, say, my-suspend and then do xapmload --click-command my-suspend . On some new machines (for instance HP Omnibook 4150 - 366 MHz model) when accessing /proc/apm, you may get a kernel fault: general protection fault: f000. Stephen Rothwell http://www.canb.auug.org.au/~sfr/ explaines: "This is your APM BIOS attempting to use a real mode segment while in protected mode, i.e. it is a bug in your BIOS. .. We have seen a few of these recently, except all the others are in the power off code in the BIOS wher we can work around it by returning to real mode before attempting to power off. Here we cannot do this." apmd-rhcn-2.4phil-1 by RedHat ftp://rhcn.redhat.com/pub/rhcn/ contains an unofficial patch for shutting down the PCMCIA sockets before a suspend and patches for multiple batteries. 55..88.. BBaatttteerriieess For information about available battery types, take a look at the Hardware Features chapter above. Please see Battery Powered Linux Mini-HOWTO by Hanno Mueller http://www.lava.de/~hanno/ for detailed information. Stephen Rothwell http://www.canb.auug.org.au/~sfr/ is currently integrating a patch that will add multiple battery support to the kernel APM. From the mobile-update page (modified by WH): Discharge the battery. If your battery runs only for about 20 minutes, you probably suffer from memory effects. Most laptops do not discharge the battery properly. With low powered devices like old computer fans they can be discharged completely. This removes memory effects. You should do so even with LiIon batteries, though they don't suffer much from memory effext (the manual of an IBM Thinkpad says to cycle the batteries through a full charge/discharge cycle 3 times every few months or so). WARNING: Try this at your own risk! Make sure the voltage of the fans is compatible to your battery. It works for me. In the US, this company has most batteries for anything and can rebuild many that are no longer manufactured: Batteries Plus, 2045 Pleasant Hill Road, Duluth, GA 30096 +1 770 495 1644. 55..99.. UUSSBB Newer laptops come with the UniversalSerialBus. I haven't tried it on any of my systems because I don't have any USB devices. Visit http://peloncho.fis.ucm.es/~inaky/uusbd-www/ for the USB Linux home page. 55..1100.. MMeemmoorryy Unfortenately most laptops come with a proprietary memory chips. So they are not interchangeable between different models. 55..1111.. PPlluugg--aanndd--PPllaayy DDeevviicceess ((PPnnPP)) The _P_l_u_g _a_n_d _P_l_a_y _d_r_i_v_e_r _p_r_o_j_e_c_t for Linux is a project to create support within the Linux kernel (see Linux.Org for more information) for handling Plug and Play (and other semi-PnP) devices in a clean, consistent way. It aims to allow a driver of any type of hardware to have this hardware configured by the PnP driver in the kernel. This driver is then notified when the device is reconfigured, or even removed from the system, so as to allow for graceful action in these circumstances http://www.io.com/~cdb/mirrors/lpsg/pnp-linux.html . _I_S_A _P_n_P _t_o_o_l_s is another useful package. And there is a project at RedHat http://www.redhat.com/pnp/overview.html . 55..1122.. DDoocckkiinngg SSttaattiioonn // PPoorrtt RReepplliiccaattoorr 55..1122..11.. DDeeffiinniittiioonnss First some definitions. There is a difference between _d_o_c_k_i_n_g _s_t_a_t_i_o_n and _p_o_r_t _r_e_p_l_i_c_a_t_o_r. I use the term _d_o_c_k_i_n_g _s_t_a_t_i_o_n for a box which contains slots to put some interface cards in, and space to put a harddisk, etc. in. This box can be permanently connected to a PC. A _p_o_r_t _r_e_p_l_i_c_a_t_o_r is just a copy of the laptop ports which may be connected permanently to a PC. 55..1122..22.. OOtthheerr SSoolluuttiioonnss I don't use a docking station. They seem really expensive and I can't see any usefulness. OK you have to mess up with some more cables, but is it worth so much money? Docking stations are useful in an office environment when you have a permanent network connection, or need the docking station's SCSI adaptor (e.g., for a CD-R). Also all docking stations I know are proprietary models, so if you change your laptop you have to change this device, too. I would prefer to buy a PC instead and connect it via _n_e_t_w_o_r_k to the laptop. Or use an external display, which usually works well as described above, and an external keyboard and mouse. If your laptop supports an extra PS/2 port you may use a cheap solution a _Y _c_a_b_l_e, which connects the PS/2 port to an external keyboard and an external monitor. Note: Your laptop probably has support for the _Y _c_a_b_l_e feature, e.g. the COMPAQ Armada 1592DT. 55..1122..33.. CCoonnnneeccttiioonn MMeetthhooddss AFAIK there are _t_h_r_e_e _s_o_l_u_t_i_o_n_s to connect a laptop to a docking station: 1. SCSI port 2. parallel port 3. (proprietary) docking port From Martin J. Evans martin@mjedev.demon.co.uk "The main problem with docking stations is getting the operating system to detect you are docked. Fortunately, if you configure your kernel with the /proc file system (does anyone not do this?) you can examine the devices available and thus detect a docked state. With this in mind a few simple scripts is all you need to get your machine configured correctly in a docked state. You may want to build support for the docking station hardware as modules instead of putting it directly into the kernel. This will save space in your kernel but your choice probably largely depends on how often you are docked. 1) Supporting _a_d_d_i_t_i_o_n_a_l _d_i_s_k_s on the docking station SCSI card To my mind the best way of doing this is to: 1. Either build support for the SCSI card into the kernel or build it as a module. 2. Put the mount points into /etc/fstab but use the "noauto" flag to prevent them from being mounted automatically with the mount -a flag. In this way, when you are docked you can explicitly mount the partitions off any disk connected to the docking station SCSI card. 2) Supporting _a_d_d_i_t_i_o_n_a_l _n_e_t_w_o_r_k _a_d_a_p_t_o_r_s in the docking station You can use a similar method to that outlined above for the graphics card. Check the /proc filesystem in your rc scripts to see if you are docked and then set up your network connections appropriately. " Once you determine this information, you may use a script, similar to the following example, to configure the connection to your docking station at startup. The script is provided by Friedhelm Kueck: ______________________________________________________________________ # check, if Laptop is in docking-station (4 PCMCIA slots available) # or if it is standalone (2 slots available) # Start after cardmgr has started # # Friedhelm Kueck mailto:fk@impress.de # 08-Sep-1998 # # Find No. of Sockets SOCKETS=`tail -1 /var/run/stab | cut -d ":" -f 1` case "$SOCKETS" in "Socket 3") echo Laptop is in Dockingstation ... echo Disabeling internal LCD Display for X11 echo cp /etc/XF86Config_extern /etc/XF86Config # # Setup of PCMCIA Network Interface after start of cardmge # echo echo "Setting up eth0 for use at Network ..." echo /sbin/ifconfig eth0 10.1.9.5 netmask 255.255.0.0 broadcast 10.1.255.255 /sbin/route add -net 10.1.0.0 gw 10.1.9.5 /sbin/route add default gw 10.1.10.1 ;; "Socket 1") echo Laptop is standalone echo Disabling external Monitor for X11 cp /etc/XF86Config_intern /etc/XF86Config echo echo Network device NOT setup ;; esac ______________________________________________________________________ 55..1133.. NNeettwwoorrkk CCoonnnneeccttiioonnss 55..1133..11.. RReellaatteedd HHOOWWTTOOss 1. PLIP-mini-HOWTO 2. NET-3-HOWTO 3. Ethernet-HOWTO 4. Term-Firewall-mini-HOWTO 55..1133..22.. CCoonnnneeccttiioonn MMeetthhooddss 55..1133..22..11.. PPCCMMCCIIAA NNeettwwoorrkk CCaarrdd If your laptop supports PCMCIA this is the easiest and fastest way to get network support. Make sure your card is supported before buying one. 55..1133..22..22.. SSeerriiaall NNuullll MMooddeemm CCaabbllee Probably the cheapest way to connect your laptop to another computer, but quite slow. You may use PPP or SLIP to start the connection. 55..1133..22..33.. PPaarraalllleell PPoorrtt NNIICC ((PPoocckkeett AAddaappttoorr)) Accton Pocket Ethernet and Linux This ethernet adaptor uses a parallel port and delivers approximately 110k Bytes/s throughput for those notebooks that do not have PCMCIA slots. Linux and Linksys Ethernet Adaptors A short note on the use of the Linksys parallel-port ethernet adaptor under Linux. This is a widely available networking adaptor that doesn't require a PCMCIA slot. 55..1133..22..44.. PPaarraalllleell ""NNuullll"" MMooddeemm CCaabbllee Offers more speed than a serial connection. Some laptops use chipsets that will not work with PLIP. Please see PLIP-HOWTO for details. 55..1133..22..55.. DDoocckkiinngg SSttaattiioonn NNIICC I don't have experience with a NIC in a docking station yet. 55..1144.. MMooddeemm There are three kinds of modems available: internal, PCMCIA card or external serial port modems. But some internal modems will NOT work with Linux such as the MWave modems (IBM) or if the laptop has a WinModem. This is caused by non-standard hardware. So you have to use either a PCMCIA card modem or an external modem. Quotation from the Kernel-FAQ: "9.Why aren't WinModems supported? (REG, quoting Edward S. Marshall) The problem is the lack of specifications for this hardware. Most companies producing so-called _W_i_n_M_o_d_e_m_s refuse to provide specifications which would allow non- Microsoft operating systems to use them. The basic issue is that they don't work like a traditional modem; they don't have a DSP, and make the CPU do all the work. Hence, you can't talk to them like a traditional modem, and you -need- to run the modem driver as a realtime task, or you'll have serious data loss issues under any kind of load. They're simply a poor design." WARNING: Pay attention to the different kinds of phone lines: analog and ISDN. You can't connect an analog modem to an ISDN port and vice versa. Though there might be hybrid modems available. Connecting to the wrong port may even destroy your modem. Trick: If you are looking for an analog phone port in an office building which is usually wired with ISDN, take a look at the fax lines, they are often analog lines. For tracking the packets on PPP you may use pppstats. Or pload this provides a graphical view of the traffic (in and out) of the PPP connection. It is based on athena widgets hence is very portable. It also uses very little CPU time. The home of pload is http://www.engr.utk.edu/~mdsmith/pload/ . 55..1155.. SSCCSSII 55..1155..11.. HHaarrddwwaarree CCoommppaattiibbiilliittyy CChheecckk If unsure about the right SCSI support, compile a kernel with all available SCSI drivers as modules. Load each module step by step until you get the right one. 55..1155..22.. RReellaatteedd HHOOWWTTOOss 1. SCSI-HOWTO 55..1155..33.. SSuurrvveeyy AFAIK there is no laptop yet with a SCSI harddisk. Though there are two models with a built in SCSI port: Texas Instruments TI 4000 and HP OmniBook 800. For other models, if you need SCSI support you may get it by using a SCSI-PCMCIA card or via a SCSI adapter in a docking station. 55..1166.. FFllooppppyy DDrriivvee 55..1166..11.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk Usually there are no problems connecting a floppy drive to a Linux laptop. But with a laptop floppy drive you may sometimes not be able to use every feature. I encountered the superformat command (from the fdutils package) couldn't format more than 1.44MB with my HP OmniBook 800. You may also have difficulty when the the floppy drive and CD drive are mutually exclusive, or when the floppy drive is a PCMCIA device (as with the Toshiba Libretto 100). With older laptops, there might be a minor problem if they use a 720K drive. AFAIK all distributions come with support for 1.44M (and sometimes 1.2M) floppies only. Though it's possible to install Linux anyway. Please see Installation chapter. Please see kernel documentation for boot time parameters concerning certain laptop floppy drives, for instance IBM ThinkPad. Or man bootparam . 55..1177.. CCDD DDrriivvee Most notebooks today come with CD drives. If floppy and CD drive are swappable they are usually mutually exclusive. Sometimes they come as PCMCIA devices. Or as SCSI device (HP OmniBook 800). AFAIK there are discmans available which have a port to connect them to a computer or even a SCSI port. I found an article published by Ziff-Davis Publishing Company (September 1996 issue, but missed to note the URL) written by Mitt Jones: "Portable PC Card CD-ROM drives transform laptops into mobile multimedia machines", which listed: Altec Lansing AMC2000 Portable Multimedia CD-ROM Center; Axonix ProMedia 6XR; CMS PlatinumPortable; EXP CDS420 Multimedia Kit; H45 QuickPCMCIA CD; Liberty 115CD; Panasonic KXL-D740; Sony PRD-250WN CD-ROM Discman. 55..1188.. HHaarrddddiisskk 55..1188..11.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk Useful programms are hdparm, dmesg, fsck and fdisk . 55..1188..22.. MMiisscceellllaanneeaaoouuss Be careful when using your laptop abroad. I have heard about some destroyed harddisks due to a magnetic field emitted from the magnetic- holds at the backresttable of the seats in a german railway waggon. Though I am quite satisfied with the quality of the harddisk in my laptop, when I removed it from the case I unintendedly dropped it, I recommend to be very careful. 55..1199.. ZZVV PPoorrtt Some laptops come with a ZV port. Since I don't have a laptop with a ZV video port yet, I can provide only some URLs: http://www.thp.uni- koeln.de/~rjkm/linux/bttv.html (driver) http://www.mathematik.uni- kl.de/~wenk/xwintv.html (tvviewer). Alternatively to the ZV port you might use the USB port. 55..2200.. AAcccceessssoorriieess 55..2200..11.. PPCCMMCCIIAA CCaarrddss 55..2200..11..11.. CCaarrdd FFaammiilliieess 1. Ethernet adapter 2. Token Ring adapter 3. Ethernet + Modem / GSM 4. Fax-Modem / GSM adapter 5. SCSI adapter 6. I/O cards: RS232, LPT, RS422, RS485, GamePort, IrDA, Radio, Video 7. SmartCard reader, see Project Muscle - "Movement for the Use of Smart Cards in a Linux Environment" http://www.linuxnet.com/smartcard/index.html 8. Memory cards 9. harddisks 10. 2.5" harddisk adapters For desktops there are PCMCIA slots for ISA and PCI bus available. Source: http://www.lapshop.de 55..2200..11..22.. LLiinnuuxx CCoommppaattiibbiilliittyy CChheecckk With the command cardctl ident you may get information about your card. Put this information into /etc/pcmcia/config if necessary. But this may not be enough to get the card to work, but works sometimes for no-name network cards or modem cards. If you get a card to work please don't forget to announce this to the developer of the PCMCIA-CS package David Hinds http://hyper.stanford.edu/HyperNews/get/pcmcia/home.html . 55..2200..22.. PPrriinntteerrss Survey about small mobile printers: 1. CANON: BJC-80 2. CANON: BJ-30 3. HP: DeskJet 340Cbi. This is a small, portable, low-duty-cycle printer. It prints either black, or color (3 color). I have had some problems with it loading paper. Overall, the small size and portability make it a nice unit for use with laptops. I use the HP 500/500C driver with Linux. 4. Olivetti: JP-90 AFAIK only the HP and the BJC-80 machine have an infrared port. Pay attention to the supplied voltage of the power supply if you plan to travel abroad. Source: http://www.lapshop.de 55..2200..33.. PPoowweerr aanndd PPhhoonnee PPlluuggss,, PPoowweerr SSuuppppllyy When travelling abroad you might consider to take a set of different power and phone plugs with you. Also, it's useful if you can change the input voltage of the power supply, for instance from 110V in the US to 220V in germany. There might be even power supplies for 12V batteries from cars. 55..2200..44.. BBaaggss aanndd SSuuiittccaasseess You probably wonder, why I include this topic here. But shortly after using my COMPAQ Armada 1592DT I recognized that the rear side of the machine (where the ports are arranged) was slightly damaged. Though I have taken much care when transporting the laptop, this was caused by putting the bag on the floor. It seems that the laptop has so much weight, that it bounces inside the bag on its own rear side. So I decided to put a soft pad into the bag before loading the laptop. A good bag is highly recommended if you take your laptop on trips, or take it home every night. 66.. DDiiffffeerreenntt EEnnvviirroonnmmeennttss -- OOnn tthhee RRooaadd 66..11.. RReellaatteedd HHOOWWTTOOss 1. Security-HOWTO 2. Multiboot-with-LILO-mini-HOWTO 3. Ethernet-HOWTO 4. NET-3-HOWTO 5. Offline-Mailing-mini-HOWTO 6. Plip-mini-HOWTO 7. Slip-PPP-Emulator-mini-HOWTO 66..22.. CCoonnffiigguurraattiioonn TToooollss 66..22..11.. NNeettEEnnvv Do you use your laptop in different network environments? At home? In the office? At a customers site? If yes, the small package "netenv" might be useful for you. When booting your laptop it provides you with a simple interface from which you can choose the current network environment. The first time in a new environment, you can enter the basic data and save it for later reuse. Netenv sets up a file containing variable assignments which describe the current environment. This can be used by the PCMCIA setup scheme, e.g. like the one that comes with Debian/GNU Linux and perhaps others. The netenv data can be used for things like: 1. Network Device: Configure the network device for different environments. 2. Choose a proper XF86Config: Think of using your laptop standalone with touchpad vs. connected to a CRT monitor along with an external mouse. For example, a wheel mouse could be used when docked, but the driver is not compatible with the normal trackpoint or touchpad. 3. Windowmanager: You can set up your windowmanager according to the current location of your machine. 4. Printing Environment: The netenv data can easily be used to set up the printing environment. Netenv is available as Debian/GNU Linux package as well as tarball. It depends on dialog(1) for the menu system. It is developed by Gerd Bavendiek bav@rw.sni.de you may get it at http://www.uni- bielefeld.de/~portgym/net/netenv.html . 66..22..22.. MMoobbiillee IIPP Mobile IP allows a portable computer access to the Internet from different networks without changing its IP address. 66..22..22..11.. RReessoouurrcceess 1. Linux Mobile-IP 2. Linux Mobile IP from HP Labs Bristol by Manuel Rodríguez 3. MosquitoNet Mobile IP 4. Mobile IP at NUS 5. Linux Mobile-IP 6. Bay Area Research Wireless Access Network (BARWAN) Sources: Kenneth E. Harker and Dag Brattli 66..22..33.. DDHHCCPP//BBoooottPP DHCP and BootP are also useful for working in different environments. Please see the DHCP-HOWTO and BootP-HOWTO. 66..22..44.. PPPPPPDD OOppttiioonnss The pppd command can be configured via several different files: pppd file /etc/ppp/ . 66..22..55.. //eettcc//iinniitt..dd You may even choose to do your configuration by editing the /etc/init.d files manually. 66..22..66.. PPCCMMCCIIAA -- SScchheemmeess How can I have separate PCMCIA device setups for home and work? This is fairly easy using PCMCIA _s_c_h_e_m_e support. Use two configuration schemes, called home and work. For details please read the according chapter in the PCMCIA-HOWTO by David Hinds. 66..22..77.. BBoooottllooaaddeerrss 66..22..77..11.. LLIILLOO From http://www.mjedev.demon.co.uk/index.html I have taken this recommendation: The first point to note is that init will take any arguments of the form name=value as environment variable assignments if they are not recognized as something else. This means you can set environment variables from the LILO boot prompt before your rc scripts run. I set the LOCATION environment variable depending on where I am when I boot Linux. e.g. ______________________________________________________________________ LILO: linux LOCATION=home ______________________________________________________________________ Or ______________________________________________________________________ LILO: linux LOCATION=work ______________________________________________________________________ Or simply ______________________________________________________________________ LILO: linux ______________________________________________________________________ where failing to set LOCATION means the same as LOCATION=home (i.e. my default). Instead of typing LOCATION=place each time you boot you can add an entry to your /etc/lilo.conf file and use the append instruc­ tion. e.g. ______________________________________________________________________ # Linux bootable partition for booting Linux at home # image = /vmlinuz root = /dev/hda3 label = linux read-only # Linux bootable partition config ends # # Linux bootable partition for booting Linux at work # image = /vmlinuz root = /dev/hda3 label = work read-only append="LOCATION=work" # Linux bootable partition config ends ______________________________________________________________________ With the example above you can use "linux" for booting at home and "work" for booting at work. Armed with the facility above, you can now edit the relevant rc scripts to test ENVIRONMENT before running ifconfig, setting up route etc. 66..22..77..22.. OOtthheerr BBoooottllooaaddeerrss There are several other bootloaders which are often overlooked. Besides LILO, have a look at loadlin, CHooseOS (CHOS) (not GPL), GRand Unified Bootloader (GRUB), System Commander and take a look at ftp://metalab.unc.edu/pub/Linux/system/boot/loaders/. The NT boot loader or OS/2 boot loader may even be used. 66..22..88.. XX--WWiinnddoowwss From Steve I got a configuration for X windows with an external monitor: Note that I have introduced a neat trick! For my nice 17" monitor I start X with no options and get the default 16-bit 1152x864 display - but when using the LCD screen I specify a 15-bit display (startx -- -bpp 15) and get the correct 800x600 resolution automatically. This saves having to have two XConfig files. 66..22..99.. MMoorree IInnffoo Using a Laptop in Different Environments by Gerd Bavendiek . This article appeared in the August, 1997 issue of the Linux Gazette. This is an excellent, short technical article describing an easy way to setup your Linux notebook to boot into different network and printing configurations, especially useful for those who use their machines at home as well as other locations such as in the office, at school, or at a customer site. 66..33.. DDaattaa TTrraannssppoorrtt BBeettwweeeenn DDiiffffeerreenntt MMaacchhiinneess I don't have experience with this topic yet. So just a survey about some means of data transport and maintaining data consistency between different machines. 66..33..11.. HHaarrddwwaarree 1. external harddisks 2. ZIP drive Wade Hampton wrote: "You may use MS-DOS formatted ZIP and floppy discs for data transfer. You may be able to also use LS120. If you have SCSI, you could use JAZ, MO or possibly DVD-RAM (any SCSI disc that you could write to). I have the internal ZIP for my Toshiba 700CT. It works great (I use automount to mount it). I use VFAT on the ZIP disks so I can move them to Windows boxes, Linux boxes, NT, give them to coworkers, etc. One problem, I must SHUTDOWN to swap the internal CD with the ZIP." 66..33..22.. SSooffttwwaarree 66..33..22..11.. SSoouurrccee CCooddee CCoonnttrrooll SSyysstteemm ((SSCCCCSS)) Currently I had no time to check a SCCS system, such as RVS or CVS for this purpose. 66..33..22..22.. CCOODDAA FFiilleessyysstteemm The Coda File System is a descendant of the Andrew File System. Like AFS, Coda offers location-transparent access to a shared Unix file name-space that is mapped on to a collection of dedicated file servers. But Coda represents a substantial improvement over AFS because it offers considerably higher availability in the face of server and network failures. The improvement in availability is achieved using the complementary techniques of server replication and disconnected operation. Disconnected operation proven especially valuable in supporting portable computers http://www.coda.cs.cmu.edu/ . 66..33..22..33.. WWWWWWssyynncc This is a program written in Perl that will update your web pages by ftp from your local pages. This was originally written for updating Demon home-pages, but will work with other providers which provide direct FTP access to your web pages. I didn't check this for laptop purposes yet. You may get the program at http://www.alfie.demon.co.uk/wwwsync/ . 66..44.. SSeeccuurriittyy iinn DDiiffffeerreenntt EEnnvviirroonnmmeennttss 66..44..11.. IInnttrroodduuccttiioonn I am not a computer security expert. Please read the Security-HOWTO for more information. I just collected some information below. Note, these means are just small steps to additional security, though I recommend that you use them. 66..44..22.. MMeeaannss ooff SSeeccuurriittyy 1. Kennsington Lock: AFAIK proprietary lock solution with different laptops http://www.kennsington.com 2. SmartCards: by DESKO http://www.desko.de are not available for Linux yet. The only available laptop with a SmartCard builtin is the Siemens Scenic Mobile 800. 3. User passwords: can be easily bypassed if the intruder gets physical access to your machine 4. BIOS passwords: are also easily crackable, though sometimes harder than with desktops 5. Name plates: to reduce the possibility of theft, you may want to have a nameplate made and affixed to the cover of the laptop. A nice one will cost you about $12, and can be made by any good trophy shop. They'll glue it on for you too. You could use double- sided tape instead, but glue is more permanent. You may even make an engravement into the laptop cover. 6. Boot loader: a boot loader may be used to put your name and phone number (or whatever text you choose) into the boot sequence before the operating system is loaded. This provides a label that can't be removed by editing files or even doing a simple format of the harddisk. 7. Antivirus policy: I have seen an antivir RPM somewhere. Check the BIOS for an option to disable writing at the boot sector. 8. Database of stolen laptops: Just in case, there is at least one database of stolen laptops in the WWW, which is free of charge, but I have lost the URL. 9. Laptop as a security risk itself: Since a laptop can easily be used to intrude a network, it seems a good policy to ask the system administrator for permission before connecting a laptop to a network. 10. Secure Protocol: When connecting to a remote server always use a secure protocol. 66..55.. DDeeaalliinngg wwiitthh DDoowwnn TTiimmeess ((CCrroonn JJoobbss)) A cron-like program that doesn't go by time: anacron (like "anac(h)ronistic") is a periodic command scheduler. It executes commands at intervals specified in days. Unlike cron, it does not assume that the system is running continuously. It can therefore be used to control the execution of daily, weekly and monthly jobs (or anything with a period of n days), on systems that don't run 24 hours a day. When installed and configured properly, anacron will make sure that the commands are run at the specified intervals as closely as machine-uptime permits. hc-cron This program is a modified version of Paul Vixie's widely used cron daemon. Like the original program it runs specified jobs at periodic intervals. However, the original crond relies on the computer running continuously, otherwise jobs will be missed. This problem is addressed by hc-cron, that is indended for use on _h_o_m_e_-_c_o_m_p_u_t_e_r_s that are typically turned off several times a day; hc-cron will remember the time when it was shut down and catch up jobs that have occurred during down time when it is started again. Felix Braun is the author of the programm, it is available at http://metalab.unc.edu /pub/Linux/system/daemons/cron . 77.. OOtthheerr RReessoouurrcceess Kenneth E. Harker maintains a quite valuable database at http://www.cs.utexas.edu/users/kharker/linux-laptop/ . Please have a look at his site to get current information about laptop related mailing lists, newsgroups, magazines and newsletters, WWW sites and a big database about many different laptop pages. To join the _L_i_n_u_x_-_L_a_p_t_o_p_-_M_a_i_l_i_n_g_-_L_i_s_t write a mail to with subscribe linux-laptop in the subject. You will get a confirmation message than, which you have to reply accordingly. There is now a _d_e_b_i_a_n_-_l_a_p_t_o_p _m_a_i_l_i_n_g _l_i_s_t. Any questions or discussions concerning running the Debian/GNU Linux operating system(s) on laptops are welcome. Send mail to with a subject of subscribe. Or visit thehttp://www.debian.org site and use the online form. 88.. RReeppaaiirriinngg tthhee HHaarrddwwaarree There are several different reasons that could make it necessary to open the case of a laptop. 1. repairing broken hardware 2. get some hardware info, which isn't available otherwise 3. remove the speakers (speakerrektomie, as described in Visual-Bell- mini-HOWTO) 4. install overdrive for CPU 5. change BIOS battery 6. upgrade harddisk 7. upgrade memory Repairing a laptop can be quite expensive if you don't have a manufacturer's warranty. Sometimes professional support is bad. But opening a laptop case can be difficult. Often the procedures to upgrade the memory and the harddisk are described in the manual. For further details, you should try to get the maintainance/technical manual. Just be extremely careful and make notes as to where each screw goes. You must get most of them back in the right hole or you could ruin the machine by damaging the system board. Also after you get all the screws to an assembly out (some will be hidden) the parts are usually held together with plastic clips molded in, so you still must exercise care to separate them. Sometimes you need certain tools, for instance TORX screw drivers or a solder kit. Good luck. I found two books about PC hardware which contained a dedicated chapter about laptops: · Scott Mueller: Upgrading and Repairing PCs. QUE Corporation. · Marc Misani: The Complete Hardware Upgrade and Maintainance Guide. Both books don't know about Linux and both are quite short about laptops. The book by Marc Minasi provides a little more information about laptops. WARNING: Usually laptop manufacturers declare the warranty to be void if the case was opened by people other than their own staff. 99.. SSoolluuttiioonnss wwiitthh LLaappttooppss 99..11.. IInnttrroodduuccttiioonn The power and capabilities of laptops are sometimes limited as described above. But in turn, they have a feature which desktops don't have, their mobility. I try to give a survey about applications which make sense in connection with laptops. Since I couldn't try all of them, there is currently little documentation. If you can provide further material, please contact me. 99..22.. MMoobbiillee NNeettwwoorrkk AAnnaallyyzzeerr I'm not an expert in this field, so I just mention the tools I know. Please check also for other applications. Besides the usual tools tcpdump, netcat, there are two applications I know, which may be used to analyze network traffic: The _M_u_l_t_i _R_o_u_t_e_r _T_r_a_f_f_i_c _G_r_a_p_h_e_r _(_M_R_T_G_) is a tool to monitor the traffic load on network-links. MRTG generates HTML pages containing GIF images which provide a LIVE visual representation of this traffic. Check http://www.ee.ethz.ch/stats/mrtg/ for an example. MRTG is based on Perl and C and works under UNIX and Windows NT. The _C_M_U_-_S_N_M_P _p_a_c_k_a_g_e, is designed to configure and analyze the SNMP protocol http://www.gaertner.de/snmp/ . 99..33.. MMoobbiillee RRoouutteerr Though designed to work from a single floppy, the _L_i_n_u_x _R_o_u_t_e_r _P_r_o_j_e_c_t _(_L_R_P_) , seems useful in combination with a laptop, too. 99..44.. HHaacckkiinngg aanndd CCrraacckkiinngg NNeettwwoorrkkss When thinking about the powers of laptops, hacking and cracking networks comes easy into mind. Though I don't want to handle this topic here, but instead recommend the Security-HOWTO. 99..55.. LLeeccttuurreess If you are giving lectures, readings or presentations in different places, a laptop might suit your needs. You can combine it with an overhead display, a beamer or a second monitor. For a second monitor or a beamer make sure it is supported by your laptop. BTW though Microsoft's PowerPoint is often used for such things, there are also Linux solutions. See the software maps at KDE (K-Office) http://www.kde.org and GNOME http://www.gnome.org/ . Or the commercial packages Applixware http://www.applix.com/appware/linux/slideshow/gfx011.html and Staroffice http://vesta.astro.amu.edu.pl/Library/Linux/LinFocus/May1998/article15.html. _M_a_g_i_c_P_o_i_n_t or mgp, is an X11-based presentation tool. The home page is http://www.Mew.org/mgp or ftp://ftp.Mew.org/pub/MagicPoint/ or http://jiji.mew.org/mgp/ . 99..66.. MMoobbiillee DDaattaa CCoolllleeccttiinngg 99..66..11.. RReellaatteedd HHOOWWTTOOss 1. Coffee-mini-HOWTO 2. AX-25-HOWTO 3. HAM-HOWTO 4. Serial-HOWTO 5. Serial-Programming-HOWTO 99..66..22.. AApppplliiccaattiioonnss A Linux laptop can be used to collect data outside an office, e.g. geodesy data, sales data, network checks, patient data in a hospital and others. There is support for wireless data connections via cellular phone modems and amateur radio. I am not sure whether PCMCIA radio cards are supported, see Aironet Wireless Communications http://www.aironet.com/. There are also laptops available with cases build for a rugged environment (even waterproof laptops). 99..77.. MMoobbiillee OOffffiiccee With KDE http://www.kde.org (K-Office), GNOME, http://www.gnome.org/ and the commercial products WordPerfect, Staroffice and Applixware http://www.applix.com/ Linux has more and more business software applications. With the corresponding hardware, e.g. a portable printer and a cellular phone which connects to your laptop, you will have a very nice mobile office. 99..88.. CCoonnnneeccttiioonn ttoo DDiiggiittaall CCaammeerraa AFAIK there are currently three methods to connect a digital camera to a laptop: the infrared port (IrDA), serial port and maybe USB. There are also some auxiliary programs for conversion of pictures, etc. 99..99.. CCoonnnneeccttiioonn ttoo QQuuiicckkCCaamm ((VViiddeeoo)) AFAIK there are currently two methods to connect a video camera to a laptop: a ZV port and maybe USB, but I don't know how this works with Linux. I have heard rumors about using a sound card for video data transfer to a Linux box, see http://worldvisions.ca/~apenwarr/ . I have heard rumors about a Linux-QuickCam-mini-HOWTO, but couldn't find a reliable URL yet. Check the sane package which is build for scanner support, this should contain support for still-grabbers as well. 99..1100.. CCoonnnneeccttiioonn ttoo TTeelleevviissiioonn SSeett If you have a ZV port in the laptop, it should be easy to connect it to a TV set, using either NSCA or PAL, but I don't know whether either works with Linux. 99..1111.. CCoonnnneeccttiioonn ttoo CCeelllluullaarr PPhhoonnee AFAIK there are two methods to connect a cellular phone to a laptop: via the infrared port (IrDA) or via the serial port. See the Linux/IrDA project for the current status of IrDA connections. AFAIK only the Ericsson SH888, the Nokia 8110 provide infrared support. 99..1122.. CCoonnnneeccttiioonn ttoo GGlloobbaall PPoossiittiioonniinngg SSyysstteemm ((GGPPSS)) From the Hardware-HOWTO I know there is Trimble Mobile GPS available. You may also connect a GPS via a serial port. Most GPS receivers have a data port and can connect to a PC with a special serial cable. 99..1133.. CCoonnnneeccttiioonn vviiaa AAmmaatteeuurr RRaaddiioo ((HHAAMM)) AFAIK laptops are used in HAM contests. Please see HAM-HOWTO. 99..1144.. SSaatteelllliittee WWaattcchhiinngg Together with an antenna and software like seesat or sattrack you can use a laptop to locate a satellite for visual observation. You could also use xephem on a laptop when stargazing. 1100.. OOtthheerr OOppeerraattiinngg SSyysstteemmss 1100..11.. DDOOSS//WWiinnddoowwss99xx//NNTT 1100..11..11.. IInnttrroodduuccttiioonn Unfortunately, there are a few reasons which might make it necessary to put DOS/Windows and Linux together on one laptop. Often the support for the flash ROM of PCMCIA cards and modems is not available for Linux, or you have to retrieve hardware information, which is not visible with Linux, due to a lack of support by some hardware manufacturers. I'm not sure wether this tasks can be achieved under an emulation like DOS-EMU or WINE. If you want Linux with X, Netscape, etc., and Windows95, things will be tight in a 1GB harddisk. Though I do so with a 810MB disk. 1100..11..22.. DDOOSS TToooollss ttoo RReeppaarrttiittiioonn aa HHaarrdd DDiisskk Often you get a preinstalled version of Windows on your laptop. If you just want to shrink the Windows partition, you need a tool to resize the partition. Or you can remove the partition first, repartition, then reinstall. Most of the following information I found at the page of Michael Egan at http://libweb.sonoma.edu/mike/fujitsu/ . A well known and reliable, but commercial product is _P_a_r_t_i_t_i_o_n _M_a_g_i_c http://www.powerquest.com/product/pm/index.html from Power Quest. Many people have used _F_I_P_S _1_5_c (which may support FAT-32) http://bmrc.berkeley.edu/people/chaffee/fips/fips.html for repartitioning FAT partition sizes.) Also, another version from a different source is FIPS 2.0 (claims to support FAT-32) http://www.igd.fhg.de/~aschaefe/fips/ for repartitioning FAT partition sizes.) One more "newer" utility for repartitioning and resizing FAT partitions is _R_a_n_i_s_h _P_a_r_t_i_t_i_o_n _M_a_n_a_g_e_r_/_U_t_i_l_i_t_y (FAT-32 support is claimed for this as well, Linux support is taken into account.) http://www.users.intercom.com/~ranish/part/ . Something was recently published on the mailing list about a partition recovery program. I have not used this, nor examined it, nor read much about it (except for the HTML page.) It may be useful to some of you if you have problems with FIPS, Ranish Partition Manager/Utility or Partition Magic destroying your partition information. You can find information on this partition-fixer named "fixdisktable" at http://bmrc.berkeley.edu/people/chaffee/fat32.html . It is quite a ways down in that page. Or look for it via ftp in ftp://bmrc.berkeley.edu/pub/linux/rescue/ and locate the latest "fixdisktable" in that ftp directory. (Source and binary dist should be available.) 1100..11..33.. CCaavveeaattss Before repartitioning your harddisk take care about the disk layout. Especially look for hidden disk space or certain partitions used for _s_u_s_p_e_n_d _t_o _d_i_s_k or _h_i_b_e_r_n_a_t_i_o_n mode. Some laptops come with a partition which contains some BIOS programs (e.g. COMPAQ Armada 1592DT). Search the manual carefully for tools like PHDISK.EXE, Suspend to Disk, Diagnostic TOOLS. 1100..11..44.. MMuullttii BBoooott Please see the Different Environments chapter, for information about booting different operating systems from the same harddisk. 1100..11..55.. PPaarrttiittiioonn SShhaarriinngg You may share your swap space between Linux and Windows. Please see "Dealing with Limited Resources" section. Also with Linux you can mount any kind of Windows partition. The other way round there should be also some tools, but I don't have an URL yet. Also you can mount DOS drives of the type msdos, vfat and even compressed drives (Drivespace, etc.). For long file names use vfat and if you like autoconversion ( a nice feature for text files), you may do so by using the conv=auto option. I have used this in my /etc/fstab, but be aware this might cause some strange behaviour sometimes, look at the kernel docs for further details. ______________________________________________________________________ /dev/hda8 /dos/d vfat user,exec,nosuid,nodev,conv=auto 0 2 ______________________________________________________________________ 1100..22.. BBSSDD UUnniixx 1. PicoBSD is a one floppy version of FreeBSD 3.0-current, which in its different variations allows you to have secure dialup access, small diskless router or even a dial-in server. And all this on only one standard 1.44MB floppy. It runs on a minimum 386SX CPU with 8MB of RAM (no HDD required!). You probably may also use it to install BSD on a laptop as described with micro Linuxes above. You get PicoBSD at http://www.freebsd.org/~picobsd/ 2. PAO: FreeBSD Mobile Computing Package FreeBSD is a version of the UNIX operating system that runs on PC hardware. It uses a different set of support for PCMCIA devices, APM, and other mobility related issues. 3. The CMU Monarch Project Implementations of Mobile-IPv4 and Mobile- IPv6 for FreeBSD 4. XF86Config Archive. A database of XF86Config files used by Linux and FreeBSD users. If you need an XF86Config file for your notebook or laptop, check out this site. (Some documents available in Japanese only.) 5. AFAIK there is no IrDA support yet. 1111.. TTooDDoo 1. mention the corresponding kernel options in the Linux Compatibility Check sections 2. write more Hardware sections 1122.. RReevviissiioonn HHiissttoorryy v0.1 13 January 1999, first draft v0.2 15 January 1999, minor changes v0.3 28 January 1999, APM chapter started, minor changes v0.4 8 February, APM chapter rewritten, removed some lint v0.5 17 February 1999, added small USB chapter, added Dealing with Limited Resources chapter, added Solutions with Laptops chapter, minor editorial changes, released draft to the public v1.0 19 February 1999, added Sound and Keyboard chapter, minor changes, release to the LDP v1.1 28 February 1999, spelling, grammar, style checked and many additional information added by W. Wade Hampton, added CD Drive, Harddisk and Kernel chapters, many minor changes v1.2 5 March 1999, added Debian-Laptop-Mailing-List, added information about apmcd and suspendd to APM chapter, changed some URLs, minor changes v1.3 8 March 1999, minor changes 1133.. CCrreeddiittss I would like to thank the many people who assisted with corrections and suggestions. Their contributions have made this work far better than I could ever have done alone. Especially I would like to thank: · First of all Kenneth E. Harker kharker@cs.utexas.edu, from his page at http://www.cs.utexas.edu/users/kharker/linux-laptop/ I have included much material into this HOWTO, but didn't always quote him verbatim. · The other HOWTO authors. · The members of the Linux/IrDA Project. · The members of the Linux Laptop Mailing List. · The visitors and contributors of my Linux Laptop Pages. · David Hinds maintainer of the PCMCIA-CS package. · Frank Schneider SPATZ1@T-ONLINE.DE · Stefan Martig martig@iamexwi.unibe.ch · Michele Andreoli maintainer of muLinux · Klaus Franken kfr@klaus.franken.de · W. Wade, Hampton whampton@staffnet.com, did much of spell, grammar and style checking and added many valuable information · Anderson MacKay mackay@rice.edu, gave many different detailed recommendations · Shaleh shaleh@livenet.net · Bob Toxen spre@lugs.ch · Peter Sprenger spre@lugs.ch · Felix Braun fbraun@atdot.org · Steve Rader rader@wiscnet.net · Richard Worwood richard@felch01.demon.co.uk · Sorry, but probably I have forgotten to mention everybody who helped. 1144.. AAppppeennddiixx AA -- SSuurrvveeyy aabboouutt MMiiccrroo LLiinnuuxxeess Because of their small or non-existent footprint, micro-Linuxes are especially suited to run on laptops -- particularly if you use a company-provided laptop running Windows9x/NT. Or for installation purposes using another non Linux machine. There are several _m_i_c_r_o Linux distributions out there that boot from one or two floppies and run off a ramdisk. See http://www.linuxhq.com or http://www.txdirect.net/users/mdfranz/tinux.html for details. You may find a FAQ and a mailing list about boot-floppies at http://os.inf.tu-dresden.de/~sr1/boot-floppies/faq.html . Also a BootDisk-HOWTO is available. Thanks to Matthew D. Franz maintainer of _T_r_i_n_u_x for this tips and collecting most of the following URLs. 1. MuLinux http://www4.pisoft.it/~andreoli/mulinux.html by Michele Andreoli 2. tomsrtbt http://www.toms.net/~toehser/rb/ "The most Linux on one floppy. (distribution or panic disk)." by Tom Oehser 3. Trinux http://www.trinux.org "A Linux Security Toolkit" by Matthew D. Franz 4. LRP "Linux Router Project" http://www.psychosis.com/linux-router/ 5. hal91 http://home.sol.no/~okolaas/hal91.html 6. floppyfw http://www.zelow.no/floppyfw/ by Thomas Lundquist 7. minilinux http://alberti.crs4.it/softw are/mini-linux/ (seems no more valid) or http://www.kiarchive.ru/pub/linux/mini-linux/ 8. monkey http://www.spsselib.hiedu.cz/monkey/docs/english.htm 9. DLX http://www.wu-wien.ac.at/usr/h93/h9301726/dlx.html by Erich Boem 10. C-RAMDISK http://metalab.unc.edu/pub/Linux/kernel/images/ 11. BABEL http://celsius-software.hypermart.net/babel/ "A mini- distribution to run games" 12. Xdenu http://xdenu.tcm.hut.fi/ 13. LOAF http://www.ecks.org/loaf/ 14. pocket-linux http://pocket-linux.coven.vmh.net/ 15. FLUF http://www.upce.cz/~kolo/fluf.htm 16. YARD http://www.croftj.net/~fawcett/yard/ 17. TLinux http://members.xoom.com/ror4/tlinux/ 18. ODL http://linux.apostols.org/guru/wen/ 19. SmallLinux by Steven Gibson http://smalllinux.netpedia.net/ Three disk micro-distribution of Linux and utilities. Based on kernel 1.2.11. Root disk is ext2 format and has fdisk and mkfs.ext2 so that a harddisk install can be done. Useful to boot up on old machines with less than 4MB of RAM. 20. cLIeNUX by Rick Hohensee client-use-oriented Linux distribution ftp://ftp.blueznet.com /pub/colorg 21. linux-lite by Paul Gortmaker for very small systems with less than 2MB RAM and 10MB harddisk space (1.x.x kernel) http://metalab.unc.edu/pub/Linux/kernel 22. See also the packages at MetaLab formerly known as SunSite http://metalab.unc.edu/pub/Linux/system/recovery/!INDEX.html and the Boot-Disk-HOWTO 23. You may also consider some of the boot floppies provided by various distributions falling into this category, e.g. the boot/rescue floppy of Debian/GNU Linux. 24. If you like to build your own flavour of a boot floppy you may do so manually, as described in the BootDisk-HOWTO or using some helper tools, for instance mkrboot (provided at least as a Debian/GNU Linux package) or pcinitrd, which is part of the PCMCIA- CS package by David Hinds. 25. Also you might try to build your Linux system on a ZIP drive. This is described in the ZIP-Install-mini-HOWTO. 1155.. AAppppeennddiixx BB -- DDeeaalliinngg wwiitthh LLiimmiitteedd RReessoouurrcceess oorr TTuunniinngg tthhee SSyysstteemm 1155..11.. RReellaatteedd HHOOWWTTOOss 1. LBX-HOWTO 2. Small-Memory-HOWTO 1155..22.. IInnttrroodduuccttiioonn As mentioned in the introduction laptops sometimes have less resources if you compare them to desktops. To deal with limited space, memory, CPU speed and battery power, I have written this chapter. 1155..33.. SSmmaallll SSppaaccee 1155..33..11.. IInnttrroodduuccttiioonn There are different types of techniques to gain more disk space, such as sharing of space, freeing unused or redundant space, filesystem tuning and compression. Note: some of these techniques use memory instead of space. As you will see, there are many small steps necessary to free some space. 1155..33..22.. TTeecchhnniiqquueess 1. Stripping: Though many distributions come with stripped binaries today it is useful to check this. For details see man strip. To find every unstripped file you can use the file command or more convenient the tool findstrip. Attention: don't strip libraries, sometimes the wrong symbols are removed due to a bad programming technique. 2. Perforation: zum(1)reads a file list on stdin and attempts to perforate these files. Perforation means, that series of null bytes are replaced by lseek, thus giving the file system a chance of not allocating real disk space for those bytes. Example: find . -type f | xargs zum 3. Remove Odd Files and Duplicates: Check your system for core files, emacs recovery files <#FILE#> vi recovery files .swp, RPM recovery files .rpmorig and patch recovery files. Find duplicates, you may try finddup. Choose a system to name your backup, temporary and test files, e.g. with a signature at the end. 4. Clean Temporary Files: , e.g. /tmp, there is even a tool tmpwatch. 5. Shorten the Log Files: usually the files in /var/log. 6. Remove Files: Remove files which are not "necessary" under all circumstances such as man pages, documentation /usr/doc and sources e.g. /usr/src . 7. Filesystem: Choose a filesystem which treats disk space economically e.g. rsfs. Tune your filesystem e.g. tune2fs. Choose an appropriate partition and block size. 8. Reduce Kernel Size: Either by using only the necessary kernel features and/or making a compressed kernel image bzImage. 9. Compression: I didn't check this but AFAIK you may compress your filesystem with gzip and decompress it on the fly. Alternatively you may choose to compress only certain files. You can even execute compressed files with zexec 10. Compressed Filesystems: - For e2fs filesystems there is a compression version available e2compr. - DMSDOS which enables your machine to access Windows95 compressed drives (drivespace, doublestacker). If you don't need DOS/Windows95 compatibility, i.e. if you want to compress Linux-only data, this is really discouraged by the author of the program. 11. Partition Sharing: You may share swap-space (see Swap-Space-HOWTO) or data partitions between different OS (see mount). For mounting MS-DOS Windows95 compressed drives (doublespace, drivespace) you may use dmsdos http://metalab.unc.edu/pub/Linux/system/filesystems/dosfs/. 12. Libraries: Take another (older) library, for instance libc5 , this library seems to be smaller than libc6 aka glibc2 . 13. Kernel: If your needs are fitted with an older kernel version, you can save some space. 14. GUI: Avoid as much Graphical User Interface (GUI) as possible. 15. Tiny Distributions: There are some distributions available which fit from one 3.5" floppy to 10MB disk space and fit for small memories, too. See appendix A and below. 16. External Storage Devices (Hard Disks, ZIP Drives, NFS, SAMBA): Since many notebooks may be limited in their expandability, using the parallel port is an attractive option. There are external harddisks and ZIP Drives available. Usually they are also connectable via PCMCIA. Another way is using the resources of another machine through NFS or SAMBA etc. 1155..44.. HHaarrddddiisskk SSppeeeedd Use the tool hdparm to set up better harddisk performance. Though I have seen laptop disk enabled with _s_t_r_i_p_i_n_g, I can't see a reason to do so, because IMHO aka RAID0 striping needs at least to different disks to increase performance. 1155..55.. SSmmaallll MMeemmoorryy 1155..55..11.. RReellaatteedd HHOOWWTTOOss 1. Small-Memory-mini-HOWTO by Todd Burgess http://eddie.cis.uoguelph.ca/~tburgess 2. Modules-mini-HOWTO 3. Kerneld-mini-HOWTO 1155..55..22.. TTeecchhnniiqquueess Check the memory usage with free and top. Mergemem Project . Many programs contain _m_e_m_o_r_y _a_r_e_a_s _o_f _t_h_e _s_a_m_e _c_o_n_t_e_n_t that remain undetected by the operating system. Typically, these areas contain data that have been generated on startup and remain unchanged for longer periods. With mergemem such areas are detected and shared. The sharing is performed on the operating system level and is invisible to the user level programs. mergemem is particularily useful if you run many instances of interpreters and emulators (like Java or Prolog) that keep their code in private data areas. But also other programs can take advantage albeit to a lesser degree. You may also reduce the _k_e_r_n_e_l _s_i_z_e as much as possible by removing any feature which is not necessary for your needs and by modularizing the kernel as much as possible. Also you may shutdown every service or _d_a_e_m_o_n which is not needed, e.g. lpd, mountd, nfsd and close some _v_i_r_t_u_a_l _c_o_n_s_o_l_e_s. Please see Small-Memory-mini-HOWTO for details. And of coarse use _s_w_a_p _s_p_a_c_e, when possible. If possible you use the resources of another machine, for instance with X, VNC or even telnet. For more information on Virtual Network Computing (VNC), see http://http://www.uk.research.att.com/vnc/ . 1155..66.. LLooww CCPPUU SSppeeeedd You may want to overdrive the CPU speed but this can damage your hardware and I don't have experience with it. For some examples look at Adorable Toshiba Libretto - Overclocking http://www.cerfnet.com/~adorable/libretto.html. 1155..77.. PPoowweerr SSaavviinngg TTeecchhnniiqquueess 1. If you don't need infrared support, disable it in the BIOS or shutdown the IrDA device driver. There are also some IrDA features of the kernel which are useful for saving power. 2. PCMCIA services consume much power, so shut them down if you don't need them. 3. I'm not sure to which extend the _b_a_c_k_l_i_g_h_t consumes power. WARNING: AFAIK this device can only bear a limited number of uptime circles. So avoid using screensavers AFAIK this device can only bear a limited number of uptime circles. So avoid using screensavers too much. 4. For some examples to build batteries with increased uptime up to 8 hours look at Adorable Toshiba Libretto http://www.cerfnet.com/~adorable/libretto.html. 5. For information about APM look at the APM chapter above. 6. A hacked rclock . Booker C. Bense has hacked the _r_c_l_o_c_k program to include a simple battery power meter on the clock face. 7. xbatstat. A battery level status checker for Linux and X. 8. hdparm _h_d_p_a_r_m is a Linux IDE disk utility that lets you set spin- down timeouts and other disk parameters. It works also for some SCSI features. 9. Mobile Update Daemon This is a drop-in replacement for the standard update daemon, mobile-update minimizes disk spin ups and reduces disk uptime. It flushes buffers only when other disk activity is present. To ensure a consistent file system call sync manually. Otherwise files may be lost on power failure. mobile- update does not use APM. So it works also on older systems. 10. Toshiba Linux Utilities This is a set of Linux utilities for controlling the fan, supervisor passwords, and hot key functions of Toshiba Pentium notebooks. There is a KDE package _K_l_i_b_r_e_t_a, too. 11. At Kenneth E. Harker's page there is a recommendation for LCDproc LCDProc . "LCDproc is a small piece of software that will enable your Linux box to display live system information on a 20x4 line backlit LCD display. This program shows, among other things, battery status on notebooks." I tried this package and found that it connects only to the external Matrix-Orbital 20x4 LCD display http://www.matrix-orbital.com/, which is a LCD display connected to a serial port. I can't see any use for a laptop yet. 12. Diald: Dial Daemon . The Diald daemon provides on demand Internet connectivity using the SLIP or PPP protocols. Diald can automatically dial in to a remote host when needed or bring down dial-up connections that are inactive. 13. KDE http://www.kde.org provides _K_A_P_M, _K_b_a_t_m_o_n and _K_c_m_l_a_p_t_o_p. Written by Paul Campbell _k_c_m_l_a_p_t_o_p is a set of KDE control panels that implements laptop computer support functions, it includes a dockable battery status monitor for laptops - in short a little icon in the KDE status bar that shows how much battery time you have left. It also will warn you when power is getting low and allows you to configure power saving options. Similar packages you may find at the GNOME project http://www.gnome.org/ . See the software maps at both sites. 14. Please see Battery Powered Linux Mini-HOWTO by Hanno Mueller, hanno@lava.de http://www.lava.de/~hanno/ for more information. 1155..88.. KKeerrnneell 1155..88..11.. RReellaatteedd HHOOWWTTOOss · Kernel-HOWTO · BootPrompt-HOWTO Many kernel features are related to laptops. For instance APM, IrDA, PCMCIA and some options for certain laptops, e.g. IBM ThinkPads. In some distributions they not configured. And the kernel is usually bigger than necessary. So it's seems a good idea to customize the kernel. Though this task might seem difficult for the beginner it is highly recommended. Since this involves dangerous operations you need to be careful. But, if you can install a better kernel successfully, you've earned your intermediate Linux sysadmin merit badge. - Since this topic is already covered in other documents I want handle this here. 1155..99.. TTiinnyy AApppplliiccaattiioonnss aanndd DDiissttrriibbuuttiioonnss A small collection yet, but I'm looking for more information. 1. BOA - HTTP server. 2. Pygmy - HTTP server. 3. MGR - a graphical windows system, which uses much less resources than X. 4. LBX - Low Bandwidth X. 5. blackbox - X11 window manager 204K. 6. linux-lite - distribution based on a 1.x.x kernel for systems with only 2MB memory and 10MB harddisk. URL see above. 7. smallLinux - http://smalllinux.netpedia.net/ . Three disk micro- distribution of Linux and utilities. Based on kernel 1.2.11. Root disk is ext2 format and has fdisk and mkfs.ext2 so that a harddisk install can be done. Useful to boot up on old machines with less than 4MB of RAM. 8. cLIeNUX - client-use-oriented Linux distribution. 9. minix - not a Linux but a UNIX useful for very small systems, such as 286 CPU and 640K RAM http://www.cs.vu.nl/~ast/minix.html . There is even X support named mini-x by David I. Bell ftp://ftp.linux.org.uk/pub/linux/alan/ . 10. screen - tiny but powerful console manager. 11. ash - tiny shell. 12. tinyirc - a small IRC client.